Re: [hobbit] SPLITNCV

[Steinar M. Skúlason <steinarms (at) gmail.com>]

hehe GAUGE ofcourse, that explains why rrdcreate was trying to create graphs
with DERIVE :)

Thanx Tomas, didn't find anything about this patch in my search.


/Steinar

On Tue, Feb 16, 2010 at 11:04 PM, Stewart, Tom L.
<Tom.Stewart (at) landsend.com>wrote:

> > TEST2RRD includes "queue_count=ncv"
> > SPLITNCV_queue_count=*:GAUAGE:600:0:U" ( also tried *:GAUAGE )
>
> The word GAUAGE does not look right.
>
> Tom
>
> -----Original Message-----
> From: Thomas Eckert [mailto:thomas.eckert (at) IT-Eckert.de]
> Sent: Tuesday, February 16, 2010 3:48 PM
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] SPLITNCV
>
>
> Hi,
>
> have a look at
>        http://www.hswn.dk/hobbiton/2008/10/msg00423.html
>
> or use the current SVN-snapshot of xymon-4.3.0 as that patch was added by
> the
> end of last year
>        http://www.hswn.dk/hobbiton/2009/11/msg00169.html
>
> All the best,
>
>        Thomas
>
> On Tue, 16 Feb 2010, Steinar M. Skúlason wrote:
>
> > Hi all,
> >
> > I have create a test that I call queue_count and it monitors the
> QueueDepth
> > of JmsQueue's on Weblogic
> > My output is like so :
> >
> > OnlineQueue      : 5
> > TimeQueue        : 0
> > ReloadQueue     : 1
> >
> > Queue names are not always the same between hosts so I'd rather not have
> the
> > queue name as a DS in the rrd.
> >
> > I put my check in the hobbitserver.cfg
> >
> > TEST2RRD includes "queue_count=ncv"
> > SPLITNCV_queue_count=*:GAUAGE:600:0:U" ( also tried *:GAUAGE )
> >
> >
> > I always get a similar error in rrd-satus.log
> >
> > 2010-02-16 09:32:05 hobbitd_rrd: Got message 1604
> > @@status#1604/calkopas17|1266312725.234658|10.10.10.10:198
> >
> ||calkopas17|queue_count|1266314525|green||green|1266271210|0||0||1266312669|linux|external_servers/Test
> > 2010-02-16 09:32:05 startpos 392396, fillpos 392396, endpos -1
> > 2010-02-16 09:32:05 Creating rrd
> > /var/lib/xymon/rrd/calkopas17/queue_count,ReloadQueue.rrd
> > 2010-02-16 09:32:05 RRD create param 00: 'rrdcreate'
> > 2010-02-16 09:32:05 RRD create param 01:
> > '/var/lib/xymon/rrd/calkopas17/queue_count,ReloadQueue.rrd'
> > 2010-02-16 09:32:05 RRD create param 02: '-s'
> > 2010-02-16 09:32:05 RRD create param 03: '300'
> > 2010-02-16 09:32:05 RRD create param 04: 'DS:lambda:DERIVE:600:U:U'
> > 2010-02-16 09:32:05 RRD create param 05: 'DS:lambda:DERIVE:600:U:U'
> > 2010-02-16 09:32:05 RRD create param 06: 'RRA:AVERAGE:0.5:1:576'
> > 2010-02-16 09:32:05 RRD create param 07: 'RRA:AVERAGE:0.5:6:576'
> > 2010-02-16 09:32:05 RRD create param 08: 'RRA:AVERAGE:0.5:24:576'
> > 2010-02-16 09:32:05 RRD create param 09: 'RRA:AVERAGE:0.5:288:576'
> > 2010-02-16 09:32:05 RRD error creating
> > /var/lib/xymon/rrd/testserver1/queue_count,ReloadQueue.rrd: Duplicate DS
> > name: lambda
> >
> >
> > So it looks like it's not picking up the "GAUGE" and it's always trying
> to
> > squeeze two results into one rrd where I want a rrd per JmsQueue
> >
> >
> > I'm using xymon 4.3.0-beta2
> >
> > Do you spot some obvious errors in my config ?
> >
> >
> > Best Regards,
> > Steinar M.
> >
>
> --
> -------------------------------------------------------------------------
> | IT-Beratung Eckert  | Hartkirchweg 54          | fon: +49 (0)761/ 594
> 9898
> | Thomas Eckert       | 79111 Freiburg i.Br.     | fax: +49 (0)761/ 594
> 9899
> |                     | Germany                  |
> http://www.it-eckert.de/
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
>