[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [hobbit] Cisco monitoring?

Husemann, Harald a écrit :

Hi,
you should run "devmon --readbbhosts -vvv --debug" and examine the output, if it was able to contact the switch and figure out the template for it from the sysdesc string. 

hh

William Ottley schrieb:

Yep I noticed that: but I thought it wasn't working since I didn't see
anything in the log file...LOL guess I assumed something would go wrong? LOL 

Anyways I noticed the hosts.db file was being udpated.

Now the next step is to figure out how I go about doing the tests:
bandwidth, uptime, etc for the asa5500
On 19/03/09 10:21 AM, "Husemann, Harald" <Harald.Husemann (at) materna.de> wrote: 


Hi William,

all you have to do is including your switches in the bb-hosts, with a
line like this:

<ip> <host> # DEVMON

Then, run "devmon --readbbhosts", and the devmon process will start
polling the switch.

HTH,

Harald

William Ottley schrieb:
Well we have a few 2600's, and an ASA5500 that I'd like to grab info from, 
such as up time, bandwidth usage, etc....
I saw that there is a template for cisco ASA so I'm hoping its for that 
machine.
I'm new at this, and just trying to figure out what "switches" I have to put 
into the bb-hosts files...

(still haven't figured out what area to change: bb-hosts or the client
config files)...
On 19/03/09 9:38 AM, "McDonald, Dan" <Dan.McDonald (at) austinenergy.com> wrote: 


On Wed, 2009-03-18 at 12:29 -0400, William Ottley wrote:

Is there a Cisco monitoring script that I could use?
Although you will hear many calls for devmon, devmon does not currently 
support snmp v3.  If that is a requirement for you, then I would
recommend using mrtg with appropriate templates, and bbmrtg.pl to report 
the values to xymon.  I use that technique to monitor 135 UPS, 94
temperature/humidity probes, 19 firewalls, and close to 300 Cisco
routers/switches.











Hi,

I'm looking for some Cisco devmon templates 2950, 1240 and ASA5500.
Tks for any help