See the man page for hobbitserver.cfg. The FPING environment variable specifies which program to use for ping. It defaults to hobbitping. Change that and restart the server.Ralph MitchellOn Mon, Mar 16, 2009 at 4:21 PM, <mv652 (at) softhome.net> wrote:I was thinking anything besides that? Thanks MarioJosh Luthman writes:Recompile the server?On 3/16/09, mv652 (at) softhome.net <mv652 (at) softhome.net> wrote:Thanks, Is there a procedure I should follow to move to fping away from hobbitping? Thanks,Jason Hand writes:I just started using fping about a month ago and it is much better than hobbitping at reporting accurate RTT.-JasonOn Mar 16, 2009, at 12:28 PM, mv652 (at) softhome.net wrote:Hi, I am just getting started with the Xymon 4.2.3, and am very pleased with that the trending and graphing I've been looking for comes pre- built ready and working immediately after install. I have a couple questions that I wouldn't mind to be answered though... In the "conn" section of each host, the Y-Axis is in seconds, however the results seem odd as they are showing in milliseconds rather than microseconds. testing from the command line, the results are all under 500us. I opted to use hobbitping, but can move to fping if that may be the problem. Thanks, Mario To unsubscribe from the hobbit list, send an e-mail tohobbit-unsubscribe (at) hswn.dkTo unsubscribe from the hobbit list, send an e-mail tohobbit-unsubscribe (at) hswn.dkTo unsubscribe from the hobbit list, send an e-mail tohobbit-unsubscribe (at) hswn.dk-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer To unsubscribe from the hobbit list, send an e-mail tohobbit-unsubscribe (at) hswn.dkTo unsubscribe from the hobbit list, send an e-mail tohobbit-unsubscribe (at) hswn.dk