[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [hobbit] New xymon installation
- To: <hobbit (at) hswn.dk>
- Subject: RE: [hobbit] New xymon installation
- From: "Brian Catlin" <bcatlin (at) gmail.com>
- Date: Tue, 27 Jan 2009 18:51:37 -0500 (Eastern Standard Time)
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:mime-version:message-id:date :content-type:x-mailer:from:references:x-fid:x-priority:to:subject; bh=sjGUTM/v31AylKm3tKkJT4DuQtAgOvaYVUTrODUq/YM=; b=nrj18Ojt3Ki8ojDtRTKTQrFKi58oNvkZ+3MIZVoDFaQWRF0IbISXe+1l+/u+44ynwM 7DfAkDY6d12nG8C7lSew0TidF5Iv91iGU4X4hT02xk435zCQcFXEcVxhPxr7rKXOgj/J 525lb6Knkr0K1fFTABUC1n8FcdXYLa5pL2jUU=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:message-id:date:content-type:x-mailer:from:references :x-fid:x-priority:to:subject; b=BIWWtZmYjurT49f/GpO8T5DO6ddCapRJl7/gmJGnXslXlHV7jprcWPHpd7dsiK5B2k SVfTjym4KBspIs4rOcCexdlUa6H8XeNHTRrGLrEWvlxed2cUrnUTWi6jlFBLIGVV3Zr3 4SoOEER/iEjoOPTxY7AsT2dqipsh4rpp8PbhE=
- References: <BAY106-W51473B175ABC45E1BEBB628CCB0 (at) phx.gbl> <961092e10901261823qa2fd620wbf36166edb5d654a (at) mail.gmail.com> <BAY106-W35826E18EF018DE00371098CCB0 (at) phx.gbl>
You will most likely have to script this and use it as an alert action. Not
too difficult with a little perl programming I know - I did it at my last
job for a netcool monitor = had to send a trap to trip the alarms when a
phone switch heartbeat needed CPR. (soft switch).
Once you have your script built and tested, then look at the alerting
configs to act as the trigger.
There is a very good book in English = Network Programming with Perl, by
Lincoln D. Stein, I am not sure if it has been translated to other languages
It is the one I used to learn how to do the work...
Brian
lurch (at) inorbit.com
-------Original Message-------
From: opt opt
Date: 01/27/09 13:52:28
To: xymon-forum
Subject: RE: [hobbit] New xymon installation
Hi everybody i finally
resolve my problem i think it was a problem of restrictions on the folders
where xymon where install ,
and
the problem of the libpcre.so.0,
but i have another question did xymon can send
a trap snmp or somethink else ?
thank you
> Date: Mon, 26 Jan 2009 21:23:15 -0500
> From: josh (at) imaginenetworksllc.com
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] New xymon installation
>
> If it is started it isn't creating the bb.html file and the index.html
softlink.
>
> Is the ps running? If so you'll need to find the configured output
> directory because it isn't where you want.
>
> Did you install with a package or by source? What OS?
>
> On 1/26/09, opt opt <sup_op (at) hotmail.fr> wrote:
> >
> > So i try to make my thread with more detail.
> >
> > I try to install a standalone server with xymon install on it
> > i make the install without too much problem.
> > i can start the server( ./hobbit start)
> >
> > but when go to 172.24.4.99/xymon/ i have a list off all the folders that
is
> > in /opt/xymon/server/www
> > somethink goog my alias are probably good.
> >
> > so i check the different log
> >
> > 1st i have these in my log hobbitlaunch.log
> >
> > 2009-01-26 14:06:31 hobbitlaunch starting
> > 2009-01-26 14:06:31 Loading tasklist configuration from
> > /opt/xymon/server/etc/hobbitlaunch.cfg
> > 2009-01-26 14:06:31 Loading hostnames
> > 2009-01-26 14:06:31 Loading saved state
> > 2009-01-26 14:06:31 Setting up network listener on 0.0.0.0:1984
> > 2009-01-26 14:06:31 Setting up signal handlers
> > 2009-01-26 14:06:31 Setting up hobbitd channels
> > 2009-01-26 14:06:31 Setting up logfiles
> > 2009-01-26 14:06:36 Task bbdisplay terminated, status 127
> > 2009-01-26 14:07:37 Task bbdisplay terminated, status 127
> >
> > 2nd i have these in the hobbitd.log
> >
> > 2009-01-26 13:55:47 Setup complete
> > 2009-01-26 14:06:31 Setup complete
> >
> > 3rd i have these in the rrd-status
> >
> > 2009-01-26 13:55:37 Tried to down BOARDBUSY: Invalid argument
> > 2009-01-26 14:03:38 Worker process died with exit code 0, terminating
> >
> >
> > 4 i have these in the bb-display.log
> >
> > bbgen: error while loading shared libraries: libpcre.so.0: cannot open
> > shared object file: No such file or directory
> >
> >
> > any one have a idea about all the problems that i have....
> >
> >
> > i work on it to fix it during 1 weeks without results, please help thank
you
> >
> >
> >
> >
> > _________________________________________________________________
> > Découvrez toutes les possibilités de communication avec vos proches
> > http://www.microsoft.com/windows/windowslive/default.aspx
>
>
> --
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> Those who don't understand UNIX are condemned to reinvent it, poorly.
> --- Henry Spencer
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
Vous voulez savoir ce que vous pouvez faire avec le nouveau Windows Live ?
Lancez-vous !