RE: [hobbit] Dell OpenMage & hobbit

[Brian O'Mahony <brian.omahony (at) curamsoftware.com>]

#1 After a bit more investigation, it turns out that it IS picking up the RAID info the 2850s. However as these have a SCSI card in them with nothing connected, its marking them as red. How do I get the script to ignore the SCSI card?
Controller 1 is being listed as:
LSI Logic PCI-X Ultra320 SCSI Host Adapter

#2 Whats weird is when I run "omreport chassis" on the balde and the 2850s I get the same output. However it seems the blades are only sending half the data.

PE2850:
[root (at) ccvob01_pr ~]# omreport chassis
Health

Main System Chassis

SEVERITY : COMPONENT
Ok       : Fans
Ok       : Intrusion
Ok       : Memory
Ok       : Power Supplies
Ok       : Processors
Ok       : Temperatures
Ok       : Voltages
Ok       : Hardware Log

For further help, type the command followed by -?

PE1855:
[root (at) ccregdub_pr ~]# omreport chassis
Health

Main System Chassis
                                <----Hobbit gets cut off here
SEVERITY : COMPONENT
Ok       : Memory
Ok       : Power Supplies
Ok       : Processors
Ok       : Temperatures
Ok       : Voltages
Ok       : Hardware Log

For further help, type the command followed by -?



















-----Original Message-----
From: Thomas Séglard [mailto:tsg (at) bluekiwi-software.com]
Sent: 26 November 2008 09:48
To: hobbit (at) hswn.dk
Cc: Brian O'Mahony
Subject: Re: [hobbit] Dell OpenMage & hobbit

Hi,

I rewrote a little these scripts to match my setup. Actually, I got a
lot of Dell PE 1850/1950/2950 and so on... In addition, I rewrote
another script to grab informations from the BMC. Please, find below the
output :

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

green Fans                      : Ok    : omreport chassis fans
green Intrusion         : Ok    : omreport chassis intrusion
green Memory                    : Ok    : omreport chassis memory
green Processors                : Ok    : omreport chassis processors
green Temperatures              : Ok    : omreport chassis temps
green Voltages          : Ok    : omreport chassis volts
green Hardware Log              : Ok    : none
green Batteries         : Ok    : omreport chassis batteries

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

green All Server Components Functional !


No need for snmp, only 'sudo' ! Obviously, the OMSA package has to be
installed on your monitored servers.
Sincerly,

ThomaS

Buchan Milne a écrit :
> On Tuesday 25 November 2008 18:10:37 Brian O'Mahony wrote:
>
>> Im running two scripts from deadcat.net -- bb-omsa-raid.sh and
>> openmanage.sh.
>>
>> Decided to implement these on a number of servers, and im seeing a few
>> issues:
>>
>> 1. On PE2850s the openmanage script is showing all the information. However
>> the Raid monitor lists the disks and the controllers but reports "no
>> Controllers Found"
>>
>> 2. On PE1850 the openmanage script only picks up "Health" I assume this is
>> picking up the CHASSIS health rather than mainsystem health? Is there a
>> version for blades or do I go edit the script?
>>
>
> Have you tried devmon with the dell-poweredge template?
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
>
>



The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else
is unauthorized. If you are not the intended recipient, any disclosure,
copying, distribution or any action taken or omitted to be taken in reliance
on it, is prohibited and may be unlawful. If you are not the intended
addressee please contact the sender and dispose of this e-mail. Thank you.