Re: [hobbit] Bandwidth monitoring

[DNS <dns1407 (at) yahoo.com>]

Hi GLH,

Devmon:

OK How do i monitor bandwidth with DEVMON? And graph this?

Thanks...

DNS



----- Original Message ----
From: "Hubbard, Greg L" <greg.hubbard (at) eds.com>
To: hobbit (at) hswn.dk
Sent: Wednesday, September 10, 2008 3:04:22 PM
Subject: RE: [hobbit] Bandwidth monitoring

How about devmon?  It requires much less care and feeding than MRTG if you are concerned about the entire device -- if you only care about certain interfaces than MRTG is probably a better fit.  However, devmon only supports a few (though common!) device types, so you might also be better off with MRTG if you are using "unusual" equipment.

GLH 

-----Original Message-----
From: McDonald, Dan [mailto:Dan.McDonald (at) austinenergy.com] 
Sent: Wednesday, September 10, 2008 7:48 AM
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] Bandwidth monitoring

On Wed, 2008-09-10 at 11:04 +0200, pkc_mls wrote:
> Stef Coene a écrit :
> > On Wednesday 10 September 2008, DNS wrote:
> >  
> >> Hi All,
> >>
> >> Do anyone know (have server-side scripts) how to centraly monitor 
> >> Bandwidth usage of switches/servers/router etc.? If so how do I 
> >> configure this step-by-step in Hobbit?
> >>    
> > I use mrtg.  It can query via snmp routers and servers and store the 
> > data in a rrd file (just like hobbit).  I never tried to integrade 
> > the information in hobbit, but I'm sure it can be done.
> >
> >  
> the integration is described in here :
> http://www.hswn.dk/hobbit/help/hobbit-mrtg.html
> 
> this will simply add the graphs in the trend columns (by default) for 
> the client.


Or, you can run bbmrtg.pl and have it generate alerts.

--
Daniel J McDonald, CCIE #2495, CISSP #78281, CNX Austin Energy http://www.austinenergy.com


To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk