[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [hobbit] "Info" column slow on latest snapshot (20080422)
- To: <hobbit (at) hswn.dk>
- Subject: RE: [hobbit] "Info" column slow on latest snapshot (20080422)
- From: "Sebastian Auriol" <spa (at) syntec.co.uk>
- Date: Mon, 21 Jul 2008 17:54:40 +0100
- Disposition-notification-to: "Sebastian Auriol" <spa (at) syntec.co.uk>
- Thread-index: AcjpCIPI3kTmGUz+Q0GOcBgL0PV3QwCSdJzQ
Well, I note that Henrik's demo site has the info page working fine:
http://www.hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=voodoo.hswn.dk
<http://www.hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=voodoo.hswn.dk&SERVICE=inf
o> &SERVICE=info
Though I don't know exactly which snapshot that is running.
Sebastian
_____
From: Gary Baluha [mailto:gumby3203 (at) gmail.com]
Sent: 18 July 2008 19:57
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] "Info" column slow on latest snapshot (20080422)
Yeah, three snapshots ago (I forget which one), the info page was slow to
load for me. Then I put in another snapshot, and the info page would load
normally, but I would get intermittent "Internal Server Error" pages. I
guess we can assume Henrik is working on updating the info page ;-)
On Fri, Jul 18, 2008 at 2:38 PM, Sebastian <spa (at) syntec.co.uk> wrote:
I have the same problem with a different snapshot - it says
<http://hobbitmon.sourceforge.net/> Hobbit Monitor 4.3.0-0.20080403 at the
bottom of the web pages, but I'm pretty sure it's from 22nd May. Basically
the "Info" column is very slow to display (takes 30 seconds) and most of the
info that should be there (comparing with Henrik's demo site) is missing,
including the option to disable tests, and I get the "Alert configuration
unavailable" message. I wonder if there is a timeout trying to get the
alert configuration, which is why it eventually displays, but takes a while.
The info column used to work fine with an earlier snapshot (probably 18th
March) on the same server - I simply compiled and installed the newer
snapshot over the top of the old one and this problem started. For
information:
-rwxrw-r-- 1 hobbit hobbit 7044 Apr 15 19:40 hobbit-alerts.cfg
so Apache should be able to read it OK... I even tried changing the group
owner to apache, but that didn't help.
Any ideas on how to solve this?
Sebastian
_____
From: Gary Baluha [mailto:gumby3203 (at) gmail.com]
Sent: 23 April 2008 18:42
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] "Info" column slow on latest snapshot (20080422)
Yeah, I tested and it takes about the same for me. It feels a lot longer,
but I guess that's only because I'm used to it coming up so much quicker.
Wonder if it's related to the "Alert configuration unavailable" message.
I'm guessing that part is because Henrik hasn't finished rewriting it yet...
On Wed, Apr 23, 2008 at 11:39 AM, Lars Ebeling
<lars.ebeling (at) leopg9.no-ip.org> wrote:
For me it takes about 15 seconds (tested twice, not statistically
significant ;) )
Lars
----- Original Message -----
From: Gary Baluha <mailto:gumby3203 (at) gmail.com>
To: hobbit (at) hswn.dk
Sent: Wednesday, April 23, 2008 4:45 PM
Subject: Re: [hobbit] "Info" column slow on latest snapshot (20080422)
"not slow" would be, I click on "Info" and 10 seconds later or less, the
page is fully displayed. It is taking about a minute for the page to load,
which is slower than the 4.2.0 hobbit server I have running.
On Wed, Apr 23, 2008 at 2:40 AM, Lars Ebeling
<lars.ebeling (at) leopg9.no-ip.org> wrote:
If the page loads slow depends on what you expect. But I also get: Alerting:
Alert configuration unavailable
--
Regards
Lars Ebeling
http://leopg9.no-ip.org
Hobbithobbyist
"I am not young enough to know everything."
-- Oscar Wilde
----- Original Message -----
From: Gary Baluha <mailto:gumby3203 (at) gmail.com>
To: hobbit (at) hswn.dk
Sent: Tuesday, April 22, 2008 9:22 PM
Subject: [hobbit] "Info" column slow on latest snapshot (20080422)
Is anyone else experiencing a slow "info" page load with the 2008-04-22
snapshot? It takes about a minute to load.
Also, I get this:
Alerting: Alert configuration unavailable
Admittedly, I just did an in-line install over the 4.2.0 release, so I don't
know if it's just a matter of some configuration file weirdness.