[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
curves went to zero but didn't have a report?
- To: <hobbit (at) hswn.dk>
- Subject: curves went to zero but didn't have a report?
- From: "Andrew Chen" <Andrew.Chen (at) ehealth-china.com>
- Date: Tue, 24 Jun 2008 01:17:02 -0700
- Thread-index: AcjVyRf7w8MNQ8niSwmKeQ9ubaPE4gAB5DdA
- Thread-topic: curves went to zero but didn't have a report?
Let's take a look at the CPU and Memory charts for this machine:
At around 01:00pm, the curves went to zero.
Above, the cpu and memory used 0, but I didn't recevie a RED Alert
report and email. (if there is some mothed to check this problem).
Hobbit-client configured file
UP 1h 22w
LOAD 5.0 15.0
DISK / 80 90
DISK /boot 80 90
DISK /var 80 90
DISK /data 80 90
MEMSWAP 40 60
MEMACT 80 90
MEMPHYS 101 101
This configuration only reported when the cpu and memory reach 5.0(cpu)
and 80(memory), then they will send a alert report and email. But I
can't find about cpu and memory used 0, then send an alert report and
email. Can you teach me how to do it? Thanks.