RE: [hobbit] windows question

["Shea, Graeme A" <Shea.Graeme.A (at) edumail.vic.gov.au>]

All I have done is to copy the files into the notes directory and rename the htm page to be the same as the display name on Hobbit e.g. localhost.htm, fs1.domain.internal etc. I have then just hard coded the IP address into the htm page and away it goes. There are better ways of  doing it like opening a new tab in the browser before connecting and getting the IP address from the conn test but these are things for another day. If anyone does it I would appreciate a copy the htm page.

 

Hope this helps

 

Regards

Graeme

 

From: Lennon, Padraig [mailto:Padraig.Lennon (at) pioneerinvestments.com] 
Sent: Wednesday, 20 February 2008 11:20 PM
To: hobbit (at) hswn.dk; Shea, Graeme A
Subject: RE: [hobbit] windows question

 

HI Graham.. This is a good idea.. Could you provide a little bit more info on how you use it? Can you pass a server value to it?

 

Padraig Lennon

Senior Systems Engineer

Production Services

Pioneer Global Investments (Dublin)

5th Floor Georges Quay Plaza, Dublin 2

ext: 2081

Direct dial: 00353 1 480 2081

 

 

________________________________

From: Shea, Graeme A [mailto:Shea.Graeme.A (at) edumail.vic.gov.au] 
Sent: 19 February 2008 21:21
To: hobbit (at) hswn.dk
Subject: RE: [hobbit] windows question

Off track, one trick to impress your Windows admins (assuming it fits your company policy) to add the Windows RDP Web client (http://www.microsoft.com/downloads/details.aspx?FamilyID=e2ff8fb5-97ff-47bc-bacc-92283b52b310&DisplayLang=en) to the Hobbit Notes directory (/var/lib/hobbit/www/notes).  Once you modify the htm page appropriately your Windows admins can click on the link in the Hobbit page and open a terminal session to which ever server is of interest.

 

Hope this is useful

Regards

Graeme

 

From: Rebecca Henderson [mailto:rebecca_henderson (at) link.freedom.com] 
Sent: Tuesday, 19 February 2008 8:27 AM
To: hobbit (at) hswn.dk
Subject: [hobbit] windows question

 

Is it possible to schedule a windows reboot command through hobbit? See below

C:\WINDOWS\system32\shutdown.exe/r/f

 

 

I need to run this command on a few servers every night and send emails to operations, “email” which I finally got working J

Any information would be appreciated.

Thanks!

Becki

Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.


Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.