RE: [hobbit] bb-prtdiag.sh

["Joshua Krause" <forums (at) triadbiz.rr.com>]

I found out that I could set the information that usually goes in the
bbsys.local file in the hobbitclients.cfg file and it picks it up just fine.
But currently the bb-prtdiag.sh script is showing a power supply issue but
there isn?t one:

 

red Tue Jan 8 11:20:59 EST 2008 redprtdiag reports power error light is off
!?!

red prtdiag reports power supply problems !!!  

Prtdiag Info (/usr/sbin/prtdiag -v)

 

prtdiag reports power supply problems !!!

------  ------------  --------  ---------  -------  ----   --   ---   ---

PS0      GOOD                                         6     7     2     3

PS1      GOOD                                         6     7     3     3

PS2      GOOD                                         6     6     3     3

 

 

Everything shows good but in the script I saw a section with this info in
it:

 

      #####  E250/E450/280R/480R/V490/V880/V890/PrimePower specific checks

      #####

      if [ "$ENV_CHECK" -eq "1" ]; then

          # Initialise Variables

          # Status are overwritten by prtdiag check

          POWER_ERROR_LIGHT_STATUS=" ON"

          GEN_ERROR_LIGHT_STATUS="OFF"

          DISK_ERROR_LIGHT_STATUS="OFF"

          THERM_ERROR_LIGHT="OFF"

          PS_ERROR_LIGHT_STATUS="OFF"

          ACT_ERROR_LIGHT_STATUS=" ON"

          THERM_ERROR_LIGHT_STATUS="OFF"

          THERML_ERROR_LIGHT_STATUS="OFF"

          THERMR_ERROR_LIGHT_STATUS="OFF"

          DOORL_ERROR_LIGHT_STATUS="OFF"

          DOORR_ERROR_LIGHT_STATUS="OFF"

 

And wonder if I need to set the ?POWER_ERROR_LIGHT_STATUS? to off instead of
?ON?.

 

Thanks,

 

Josh

From: Kirbach Uwe [mailto:U.Kirbach (at) EnBW.com] 
Sent: Tuesday, January 08, 2008 8:38 AM
To: hobbit (at) hswn.dk
Subject: RE: [hobbit] bb-prtdiag.sh

 

Hello Joshua,

 

> UNAME command is not defined in etc/bbsys.local

> ... etc/bbsys.local

 

I have bb-prtdiag.sh running under hobbit and i set all these variables
directly

in the script bb-prtdiag.sh.

there is no nedd to use bbsys.local (it's only Big-Brother).

 

> And I don?t believe I have a program called ?fjprtdiag?  and it looks to
be a necessary component.

 

The fjprtdiag is the Fujitsu equivalent for prtdiag for Fujitsu PrimePower
machines

and is not necessary to run the bb-prtdiag.sh

All Fujitsu stuff inside bb-prtdiag-sh is written by me.

 

I attache my version of bb-prtdiag.sh running under hobbit  - 2nd try as
gzip 

 

Mit freundlichem Gruß 

Uwe Kirbach 

-- 
Uwe Kirbach 
EnBW Systeme Infrastruktur Support GmbH 
SIS OIOIU 
Durlacher Allee 93 

76131 Karlsruhe 

Telefon: +49 (0)721 63 14139 
EMail:   u.kirbach (at) enbw.com 

EnBW Systeme Infrastruktur Support GmbH 
Sitz der Gesellschaft: Karlsruhe 
Handelsregister: Amtsgericht Mannheim  HRB 108550 
Vorsitzender des Aufsichtsrats: Dr. Bernhard Beck 
Geschäftsführer: Jochen Adenau, Dr. Peter Kramp 

-----Original Message-----
From: Joshua Krause [mailto:forums (at) triadbiz.rr.com] 
Sent: Monday, January 07, 2008 11:09 PM
To: hobbit (at) hswn.dk
Subject: [hobbit] bb-prtdiag.sh

I am trying to get the bb-prtdiag.sh script to work on a couple of Solaris
boxes and didn?t know if I could get some help from someone in the forum
that has it up and running.  Currently I am trying to get it to run on a
V880 and I am getting this error in the log file:

 

-bash-3.00$ more bb-prtdiag.log

awk: syntax error near line 1

awk: bailing out near line 1

 

and on the hobbit page I am seeing this:

 

UNAME command is not defined in etc/bbsys.local - using default: /sbin/uname

 

PLATFORM_SPEC command is not defined in etc/bbsys.local - using default:
SUNW,Sun-Fire-880

 

PRTDIAG_COMMAND command is not defined in etc/bbsys.local - using default:
/usr/platform/SUNW,Sun-Fire-880/sbin/prtdiag

 

PRTDIAG_OPT command is not defined in etc/bbsys.local - using default: -v

 

EXCLUDE_SYSTEMS command is not defined in etc/bbsys.local - using default:
Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80 UltraAX-i2
UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2 Ultra-Enterprise-10000

 

PRTDIAG_IGNORE_ERRORS variable is not defined in etc/bbsys.local - using
default: No failures|Most recent AC Power Failure|Minimum Available|CS
Fail|No Hardware failures|^===|currently no Boards|Fault     Fan

 

PRTDIAG_IGNORE_FAULTS variable is not defined in etc/bbsys.local - using
default: No Recent System Faults found|No System Faults found|Fault
Value|Fault LED|NO_FAULT|Power  Fault|Status        Fault|Fault
off

 

And I don?t believe I have a program called ?fjprtdiag?  and it looks to be
a necessary component.

 

Thanks,

 

Josh