[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [hobbit] hobit problem
- To: hobbit (at) hswn.dk
- Subject: Re: [hobbit] hobit problem
- From: "Gary Baluha" <gumby3203 (at) gmail.com>
- Date: Mon, 10 Dec 2007 16:14:55 -0500
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; bh=cA9+6RJP/5PVCbbHqJKJ2sB1HDsYW5kmB3qfEcuHVIA=; b=tSTC7Jmr8TKUBQqeKt/iZ/5dfMvtTeeUBQChcArJsT6O2XJSMChF/2oDULoP+qVlONP6kCbkpPqKc/e2E9G1Io+JjQQvoeAg1XSdMu9yRRhmGKU6zlExV5jkG+W10AXu7Edbk1THd5Fb8tsTN4DmpvkUr+A3Nd+e/Ba5aUCONcA=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=BbStGCW1p3d3fzIGlSKiCjiRQXXK460DzDHH8InZovOhID6/5Ratd9HhoMnPe2uDdzCE3K47oxs0TAsO3dC9pHGzNmiRUGPhdRqvVGlnb1amPI6cdYUkn3/1S/9euQDD60STFXS3rIRSIyRMcSbAjh+rXd7ZWqoZshJjuTSXHik=
- References: <fc.000f6d9c0abe4b513b9aca00f98a6e35.abe4b53 (at) link.freedom.com> <79CCC36428A60546B48109EFBBB7201CBD2898 (at) corp1.FREEDOM.COM>
The default compile option is to use the server-side config. I'm not sure
if it's different for AIX than unix (I don't imagine it would be), but you
can check the clientlaunch.cfg file. Look for the [client] section, and if
the line that looks like "CMD $HOBBITCLIENTHOME/bin/hobbitclient.sh" doesn't
have "--local" appended to it, than it is using the server-side config
files. Add --local and restart the hobbit client to switch to using the
client-side config file.
On Dec 10, 2007 4:12 PM, Rebecca Henderson <
rebecca_henderson (at) link.freedom.com> wrote:
> Well, that's a good question. I would think they would use the client
> side.
> How would I know for sure.
>
> -----Original Message-----
> From: hobbit (at) hswn.dk [mailto:hobbit (at) hswn.dk]
> Sent: Monday, December 10, 2007 12:44 PM
> To: Rebecca Henderson; hobbit (at) hswn.dk
> Subject: Re: [hobbit] hobit problem
> Importance: Low
>
> Obvious question, but are the clients configured to use the local
> config,
> or are they configured to use the server-side config?
>
> On Dec 10, 2007 3:38 PM, Rebecca Henderson <[
> mailto:rebecca_henderson (at) link.freedom.com ]
> rebecca_henderson (at) link.freedom.com> wrote:
>
>
>
>
> Hello,
> I have a problem with aix clients.
> Here is my localclient.cfg
> DEFAULT
> UP 1h
> LOAD 5.0 10.0
> DISK * 97 99
> MEMPHYS 100 101
> MEMSWAP 50 80
> SWAP 70 90
> MEMACT 90 97
> DISK /var IGNORE
> I have tried
> HOST=myservername
> UP 1h
> LOAD 5.0 10.0
> DISK * 97 99
> MEMPHYS 100 101
> MEMSWAP 50 80
> SWAP 70 90
> MEMACT 90 97
> DISK /var IGNORE
> When I make changes to the localclient.cfg it never picks up the
> changes.
> Like
> The IGNORE?
> Am I doing something wrong?
> Host name is ok, ip is ok.
> Any help would be appreciated.
> Thanks,
> Becki
>
>
>
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
>