RE: [hobbit] Setting up Disk usage Alarm level

["Klomp, H." <klomph (at) nlr.nl>]

Hi all, 

It is already mentioned in the discussion one of the most interesting things in disk monitoring is 
How fast the disk fills up. 

It would be nice to be able to monitor a sudden grow of used disk space. 

Regards, 

Bert Klomp 

-----Original Message-----
From: Ryan Jay B. Lapuz [mailto:rlapuz (at) fcpp.fujitsu.com] 
Sent: vrijdag 21 september 2007 2:48
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] Setting up Disk usage Alarm level

Thanks Eric,

Base on what you said, I added some points to consider and here it is:

Guidelines in setting up disk monitoring alarm levels:

1. How fast the disk fills up?
        a. Temporary disk usage
        b. Regular disk usage increase (Monthly, Weekly)
2. How fast you can respond whena warning/alarm nitification goes out?
        a. During the alarm, make sure that the remaining disk space can 
maintain system availability while addressing the problem.
        b. Identify what files to move/delete - this is to speed up the 
recovery

Can you please further eloborate if I miss other factors cause I think I 
still do.
Maybe other menbers can also add their ideas so we can make a more effective 
guidlines for disk monitoring.
I think this is very helpful specially to those that do not have a lot of 
experience like me.

Thanks and regards,
Ryan


----- Original Message ----- 
From: "Eric Meddaugh" <etmsys (at) rit.edu>
To: <hobbit (at) hswn.dk>
Sent: Thursday, September 20, 2007 7:50 PM
Subject: RE: [hobbit] Setting up Disk usage Alarm level



I probably depends on how fast the disk fills up and how quickly you can
respond to clean it.

Our "default" levels are 500Mg warning, and 100Mg red.  On some other
systems that have web servers that we want to be alarmed sooner, we have
the warning at 1g, while the alarm is 500Mg.

We've been looking at changing some of the Oracle servers we have to
higher than 500/100 since when someone is processing a giant load the
archive logs can fill the disk up way to fast.

On a system that uses disk based backups, the level are even much
higher, around 100g warning, and 70g alarm.

It'll all depend on the individual system and how fast you can respond
when a warning/alarm notification goes out.

---Eric

-----Original Message-----
From: Ryan Jay B. Lapuz [mailto:rlapuz (at) fcpp.fujitsu.com]
Sent: Thursday, September 20, 2007 07:40
To: hobbit (at) hswn.dk
Subject: [hobbit] Setting up Disk usage Alarm level

Good day!

Guys, I need your help again.
Is there someone here who have guidelines for setting up the alarm level
for
disk usage?
It's just that I can't defend it if I'm just going to set something
without
reference.

Please kindly share it to me. I just need it so badly.

Thank you very much!

Ryan



To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk



To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk





To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk