[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RE: [hobbit] Questions about hobbitd_rrd

Actually, the W is included in the SNMP poll, which is why I'm concerned.


Not to mention, the SNMP poll for the fans returns "38% of maximum" which makes me even more concerned on what will happen.

Jason Chambers     I.T. Helpdesk Associate     [cid:image001.jpg@01C7FAB2.1FA22070] <http://www.geosoft.com/>
85 Richmond St W<http://maps.google.com/maps?f=q&hl=en&q=geosoft&sll=43.650833,-79.382853&sspn=0.00708,0.013411&ie=UTF8&om=1&ll=43.653027,-79.382368&spn=0.00708,0.013433&z=17&iwloc=A&iwd=1&cid=43650833,-79382853,2112187895585156655&dtab=0> - Toronto, ON, CA - M5H 2C9 - Tel: 416.369.0111<skype:+14163690111> ext 344 - Fax: 416.369.9599

From: Sigurður Guðbrandsson [mailto:sigurdur (at) raforninn.is]
Sent: September-19-07 11:37 AM
To: hobbit (at) hswn.dk
Subject: RE: [hobbit] Questions about hobbitd_rrd

Hi.

Spaces are ignored in variable names, so your bladecentervolts would be;
NCV_bladecentervolts="Volts:GAUGE"
Only A-z and 0-9 are allowed in names, no underscores etc.
So basicly your option is to use a special name for each of the voltage you want to monitor in the graph and then rename them in hobbitgraphs.cfg for fancyness.

As far as I know about letters in datastream, I think it ignores it and just yanks the value .. you could of course change your script to include a space between the wattage value and the letter W to be on the safe side.

and HOW do I know all of this?
  My first time setup for a custom RRD graph over here aswell ... I can get all the values into RRD files pretty easy, but I just can't seem to get the graphs on the website ....

With regards,


------------------------------

Sigurður Guðbrandsson
Raförninn ehf.
Suðurhlíð 35
105 Reykjavik | Iceland
sigurdur (at) raforninn.is<mailto:sigurdur (at) raforninn.is> | www.raforninn.is<http://www.raforninn.is/>
Office: +(354) 552 2070
Mobile: +(354) 867 3573

------------------------------


________________________________
From: Jason Chambers [mailto:Jason.Chambers (at) geosoft.com]
Sent: 19. september 2007 15:21
To: 'hobbit (at) hswn.dk'
Subject: [hobbit] Questions about hobbitd_rrd
I'm just looking at the NCV_ stuff with the hobbit_rrd, and have some questions about it (for my first time setup)

I was wondering how it would handle letters in the data stream, such as:

Total: 3520W
Reserved: 1223W
Used: 1223W
Remaining: 2297W

And also, spaces in the data, such as:


+5 Volts: +4.81 Volts

With this look like NCV_bladecentervolts="+5 Volts:GAUGE" ?


Jason Chambers     I.T. Helpdesk Associate     [cid:image002.jpg@01C7FAB2.1FA22070] <http://www.geosoft.com/>
85 Richmond St W<http://maps.google.com/maps?f=q&hl=en&q=geosoft&sll=43.650833,-79.382853&sspn=0.00708,0.013411&ie=UTF8&om=1&ll=43.653027,-79.382368&spn=0.00708,0.013433&z=17&iwloc=A&iwd=1&cid=43650833,-79382853,2112187895585156655&dtab=0> - Toronto, ON, CA - M5H 2C9 - Tel: 416.369.0111<skype:+14163690111> ext 344 - Fax: 416.369.9599