[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [hobbit] HP PA-RISC Hardware monitoring ?
- To: "'hobbit (at) hswn.dk'" <hobbit (at) hswn.dk>
- Subject: RE: [hobbit] HP PA-RISC Hardware monitoring ?
- From: "Manocchia, Robert" <Robert-Manocchia (at) IDEXX.com>
- Date: Fri, 14 Sep 2007 10:08:22 -0400
Do you have ISEE installed on these servers? If so your hardware will be
automatically monitored and alerts will go out to HP automatically.
ISEE comes with your support contract and is easy to set up.
Robert Manocchia
UNIX System Administrator
IDEXX Laboratories
207 556-6860
EMail Robert-Manocchia (at) idexx.com
-----Original Message-----
From: T.J. Yang [mailto:tj_yang (at) hotmail.com]
Sent: Friday, September 14, 2007 9:04 AM
To: hobbit (at) hswn.dk
Subject: RE: [hobbit] HP PA-RISC Hardware monitoring ?
Hi, Thomas
But ioscan is jus a scan of existing hardwares, it doesn't tell if each
component
is ok or not. following is an example of a C3600.
root (at) 8519> uname -a
HP-UX ilad8519 B.11.11 U 9000/785 2013140223 unlimited-user license
root (at) 8519> model
9000/785/C3600
root (at) 8519> ioscan -k
H/W Path Class Description
====================================================
bc
10 ioa System Bus Adapter (582)
10/0 ba Local PCI Bus Adapter (782)
10/0/12/0 lan HP PCI 10/100Base-TX Core
10/0/13/0 audio Built-in Audio
10/0/14/0 ext_bus IDE Primary Channel
10/0/14/0.0 target
10/0/14/0.0.0 disk TEAC CD-532E-B
10/0/14/0.7 target
10/0/14/0.7.0 ctl Initiator
10/0/14/1 ba PCI Core I/O Adapter
10/0/14/1/1 tty Built-in RS-232C
10/0/14/1/2 tty Built-in RS-232C
10/0/14/1/3 ext_bus Built-in Parallel Interface
10/0/14/1/4 siopc Built-in Floppy Drive
10/0/14/1/4.1 floppy HP_PC_FDC_FLOPPY
10/0/14/2 usb Built-in USB Interface
10/0/14/2.1 usbhub USB Root Hub
10/0/15/0 ext_bus SCSI C896 Ultra Narrow Single-Ended
10/0/15/0.7 target
10/0/15/0.7.0 ctl Initiator
10/0/15/1 ext_bus SCSI C896 Ultra2 Wide LVD
10/0/15/1.5 target
10/0/15/1.5.0 disk QUANTUM ATLAS10K-9LVD
10/0/15/1.6 target
10/0/15/1.6.0 disk QUANTUM ATLAS10K-9LVD
10/0/15/1.7 target
10/0/15/1.7.0 ctl Initiator
10/1 ba Local PCI Bus Adapter (782)
10/1/4/0 lan PCI Ethernet (11484320)
10/4 ba Local PCI Bus Adapter (782)
10/6 ba Local PCI Bus Adapter (782)
10/6/2/0 graphics PCI Display (103c108b)
32 processor Processor
49 memory Memory
root (at) 8519>
T.J. Yang
> Date: Fri, 14 Sep 2007 10:26:49 +0200
> From: thomas.seglard (at) mxp4.com
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] HP PA-RISC Hardware monitoring ?
>
> Hi !
>
> the magical command on HP-UX (PA-RISC) is 'ioscan' on HP-UX (IA64) it's
> 'machinfo'. For example, if you want information on processors or fc
> hba, you could make :
>
> # ioscan -fknC processor | grep -i processor
> # ioscan -fknC fc | grep -i fc
>
> or simply :
>
> # ioscan -fknC
>
> to see all possibilities. Hobbit runs just fine on this kind of
> hardware, I've tested it for months on HP-UX 10.20, 11.00, 11i. You just
> need 'gcc' and GNU 'make' to build clients and that's all.
> Sincerly,
>
> ThomaS
>
> T.J. Yang a écrit :
>> Anyone know is there a module (bb or hb) to monitor HP hardware ?
>> May be better question is what is the similar command for ipmitool or
prtdiage in HP-UX ?
>>
>> T.J. Yang
>>
>> _________________________________________________________________
>> Capture your memories in an online journal!
>> http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe (at) hswn.dk
>>
>>
>>
>>
>>
>
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
_________________________________________________________________
Kick back and relax with hot games and cool activities at the Messenger
Café.
http://www.cafemessenger.com?ocid=TXT_TAGLM_SeptWLtagline
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk