Re: [hobbit] Cisco devices with many interfaces

[pkc_mls <pkc_mls (at) yahoo.fr>]

Brown, Seymour a écrit :
> Hi, again.
>
> We have a Cisco 6513 with 6 blades with 48 ports each in our 
> datacenter.  The Hobbit trend page is excruciatingly long as a result.
>
> Is there any way to break a device into sub-devices to make this more 
> manageable?
Hi,

I suggest you to modify the mrtg config so you can specify a trend page 
for virtual devices.

the mrtg sections should start with
target[mrtg.my.hobbit.device.port1]
....

etc.

if you change what's between mrtg and the port (ie my.hobbit.device in 
the example above) like this
target[mrtg.ciscoblade1.port1]

and specify ciscoblade1 in the bb-hosts, this should do the trick.

you should also set "noconn" after the # because you won't ping the 
ciscoblade1 "virtual" device you just created.

hope this'll help.
> Thanks again,
>
> =Seymour=
>
> Seymour J. Brown
>
> Network Analyst
>
> West Jefferson Medical Center
>
> 1101 Medical Center Blvd.
>
> Marrero, LA 70072
>
> 504-349-2396
>
>  
>
>
> This message contains confidential information and is intended only 
> for the individual named. If you are not the named addressee you 
> should not disseminate, distribute or copy this e-mail. Please notify 
> the sender immediately by e-mail if you have received this e-mail by 
> mistake and delete this e-mail from your system. E-mail transmission 
> cannot be guaranteed to be secure or error-free as information could 
> be intercepted, corrupted, lost, destroyed, arrive late or incomplete, 
> or contain viruses. The sender therefore does not accept liability for 
> any errors or omissions in the contents of this message, which arise 
> as a result of e-mail transmission. If verification is required please 
> request a hard-copy version. West Jefferson Medical Center, 1101 
> Medical Center Blvd., Marrero, USA, www.wjmc.org.