-----Original Message-----
From: Rich Smrcina [mailto:rsmrcina (at) wi.rr.com]
Sent: Thu 1/11/2007 10:06 PM
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] Monitoring Cisco routers
Straight from the admin. It goes in the SNMPCIDS field, right?
Hi Rich,
I think that's so (don't nail me on this); but I can't proove this,
cause I'm currently @ home...
Again: I think this is a little bit Off-topic for the Hobbit-list...
Johann
Johann Eggers wrote:
> -----Original Message-----
> From: Rich Smrcina [mailto:rsmrcina (at) wi.rr.com]
> Sent: Thu 1/11/2007 7:44 PM
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] Monitoring Cisco routers
>
> I have devmon installed, but when I run it from the command line (to
> test it), I get the following:
>
> hobbit (at) hobbit:/usr/local/devmon> ./devmon --readbbhosts
> [07-01-11 (at) 11:20:11] Could not query device: GO_Router
>
> The bb-hosts entry for GO_Router has 'devmon' as a test name (I changed
> the test name in devmon.cfg).
>
> Does devmon try to to name resolution, or will it honor the testip
> directive in bb-hosts?
> ------
>
> Do you have the correct SNMP-READ community string?
>
> Better switch to the devmon mailing-list for this topic...
>
--
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service: 360-715-2467
rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org
WAVV 2007 - Green Bay, WI - May 18-22, 2007
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk