Re: [hobbit] how can I receive alerts for every new trigger matched for 'LOG'

["Peter Welter" <peter.welter (at) gmail.com>]

Sounds a bit like a question I posted two weeks ago: Hobbit responds
on status-changes (green-.yellow->red->etc). You can make it detect
several issues, but when another issue comes up and the status itself
does not change, you will not be notified.

Although the GROUP-keyword for DISK and PROC adds granularity, this is
not possible for LOG (yet?!) and although the GROUP-keyword is very
powerful, the above remains so this does not solve your problem.

Regards,
Peter

2006/11/27, Jerry Yu <jjj863 (at) gmail.com>:
> hi, there,
> I have a LOG check for "error: #1" "error: #2" in a log file. We'd like to
> receive email alerts for each every trigger matched, "%error: #" since we
> needs to know the all the error # reported.
> Right now, it generates email alerts. but not for every new triggers.  No
> alerts are generated for a newly matched trigger log entry if the STATUS is
> red/yellow already.  In my thinking, if the LOG check itself can be
> RECOVERED after 5m (I believe the default is 30m), this ought work.
>
> Does anybody know how to change the default from 30m to 5m (for a single
> check/test)?
> Any alternative/recommendations to get the desired results?  I initially
> thought a 'creative' combination of 'REPEAT=5 DURATION<10' would do it...