[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [hobbit] NCV Graph not showing up

Henrik,

thank you for that tip. The problem was in hobbitgraph.cfg. I copied another section within the file and forgot to change "threads" to "temp". It all works know.

Thanks a lot. Chris


 

> -----Ursprüngliche Nachricht-----
> Von: Henrik Stoerner [mailto:henrik (at) hswn.dk] 
> Gesendet: Mittwoch, 26. April 2006 12:16
> An: hobbit (at) hswn.dk
> Betreff: Re: [hobbit] NCV Graph not showing up
> 
> On Tue, Apr 25, 2006 at 03:13:59PM +0200, Maxeiner, Christian wrote:
> > After that, I have added the following to my hobbitgraph.cfg:
> > 
> > [roomtemp]
> >         TITLE Server Room Temperature
> >         YAXIS degrees
> >         DEF:temp=roomtemp.rrd:Temperature:AVERAGE
> >         LINE2:temp#FF0000:Room Temperature
> >         COMMENT:\n
> >         GPRINT:threads:LAST: \: %5.1lf (cur)
> >         GPRINT:threads:MAX: \: %5.1lf (max)
> >         GPRINT:threads:MIN: \: %5.1lf (min)
> >         GPRINT:threads:AVERAGE: \: %5.1lf (avg)\n
> > 
> > There is no graph showing up on status page nor on the 
> trends page. On
> > the status page there is only a link "hobbit graph 
> ncv:roomtemp" and on
> > the trends page only a link "hobbit graph roomtemp".
> 
> This points at some problem with generating the graph from the RRD,
> using the definitions you've put into hobbitgraph.cfg. But your
> definition looks sane enough ...
> 
> One way of debugging this is to run the hobbitgraph.sh script 
> "by hand"
> and see what error-messages show up. You do it like this (all on one
> long line):
> 
> QUERY_STRING="host=voodoo.hswn.dk&service=ncv:roomtemp&graph=h
> ourly&action=view" REQUEST_METHOD=GET SCRIPT_NAME="" 
> REQUEST_URI="" ~hobbit/cgi-bin/hobbitgraph.sh 
> 
> Replace the "host=..." with the name of your host. What does 
> that say ?
> 
> 
> Regards,
> Henrik
> 
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
> 
> 
> 
>