[Xymon] Graphing in Xymon

Root, Paul T Paul.Root at CenturyLink.com
Wed Sep 4 19:59:04 CEST 2019


I've got a new test that I need to graph. It is a simple count of devices in multiple "networks".  This test only runs once a day.   I haven't done a graph in xymon in several years, and it's always a struggle.

This is the input data:

Net_AtoD: 5871
Net_EtoN: 5589
Net_OtoZ_1to9: 5242
Other: 386
InfraGen: 12
InfraSec: 25


The data comes in fine. And I get a good rrd file (all 6 networks are in there and look the same as this, except obviously the last_ds and value values:
      <ds>
                <name> NetAtoD </name>
                <type> GAUGE </type>
                <minimal_heartbeat> 600 </minimal_heartbeat>
                <min> NaN </min>
                <max> NaN </max>

                <!-- PDP Status -->
                <last_ds> 5871 </last_ds>
                <value> 5.8710000000e+04 </value>
                <unknown_sec> 267 </unknown_sec>
        </ds>


I have multiple xymon servers, and I share most of the config with an include line in xymonserver.cfg:

/etc/xymon/xymonserver-common.cfg:TEST2RRD+=",proc-mem-cfgmgrd=ncv,ucf=ncv,ConfigPulls=ncv"
/etc/xymon/xymonserver-common.cfg:GRAPHS+=",vmwarevms,hpnasnaphost,ucf,ConfigPulls"
/etc/xymon/xymonserver-common.cfg:NCV_ConfigPulls="*:GAUGE"

I've restarted a few times.

I put the graph config in its own file /etc/xymon/graph.d/ConfigPulls.cfg
[ConfigPulls]
        TITLE NCM Config PUlls
        YAXIS Number of Devices
        DEF:NetAtoD=ConfigPulls.rrd:AtoD:AVERAGE
        DEF:NetEtoN=ConfigPulls.rrd:EtoN:AVERAGE
        DEF:NetOtoZ=ConfigPulls.rrd:OtoZ:AVERAGE
        DEF:Other=ConfigPUlls.rrd:Other:AVERAGE
        DEF:InfraGen=ConfigPUlls.rrd:InfraGen:AVERAGE
        DEF:InfraSec=ConfigPUlls.rrd:InfraSec:AVERAGE
        LINE2:AtoD#00FF00:Net A to D
        LINE2:EtoN#00CCCC:Net E to N
        LINE2:OtoZ#FFCC00:Net O to Z & 1 to 9
        LINE2:Government#FF0000:Government
        LINE2:InfraGen#FFFF00:Infrastructure General
        LINE2:InfraSec#FFFFCC:Infrastructure Secure
        COMMENT:\n
        GPRINT:AtoD:LAST:Net A to D \: %5.1lf (cur)
        GPRINT:AtoD:MAX: \: %5.1lf (max)
        GPRINT:AtoD:MIN: \: %5.1lf (min)
        GPRINT:EtoN:AVERAGE: \: %5.1lf (avg)\n
        GPRINT:EtoN:LAST:Net E to N \: %5.1lf (cur)
        GPRINT:EtoN:MAX: \: %5.1lf (max)
        GPRINT:EtoN:MIN: \: %5.1lf (min)
        GPRINT:EtoN:AVERAGE: \: %5.1lf (avg)\n
        GPRINT:OtoZ:LAST:Net 0 to Z \: %5.1lf (cur)
        GPRINT:OtoZ:MAX: \: %5.1lf (max)
        GPRINT:OtoZ:MIN: \: %5.1lf (min)
        GPRINT:OtoZ:AVERAGE: \: %5.1lf (avg)\n
        GPRINT:Government:LAST:Government \: %5.1lf (cur)
        GPRINT:Government:MAX: \: %5.1lf (max)
        GPRINT:Government:MIN: \: %5.1lf (min)
        GPRINT:Government:AVERAGE: \: %5.1lf (avg)\n
        GPRINT:InfraGen:LAST:Infrastructure General \: %5.1lf (cur)
        GPRINT:InfraGen:MAX: \: %5.1lf (max)
        GPRINT:InfraGen:MIN: \: %5.1lf (min)
        GPRINT:InfraGen:AVERAGE: \: %5.1lf (avg)\n
        GPRINT:InfraSec:LAST:Infrastructure Secure \: %5.1lf (cur)
        GPRINT:InfraSec:MAX: \: %5.1lf (max)
        GPRINT:InfraSec:MIN: \: %5.1lf (min)
        GPRINT:InfraSec:AVERAGE: \: %5.1lf (avg)\n


The graph doesn't show up, just a broken link in both the test and trends pages.


Any help?

Thanks,
Paul.


Paul Root
Lead Operations Engineer    - IT Managed Services
390 Commerce Dr
Woodbury, Mn 55125
651-312-5207  paul.root at centurylink.com

This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20190904/bb5ea825/attachment.htm>


More information about the Xymon mailing list