[Xymon] Plan for XYMON and SNMP
Bruce Ferrell
bferrell at baywinds.org
Sat Jun 22 22:52:42 CEST 2019
I actually can't say what made the columns not show. I suspect xymon-snmpcollect wasn't sending a complete message.
I've been working on graphs and on inspecting the rrds that now exist, I see there is a format, but no data collected in them. No errors, just NAN. The I noticed the data format
is not compatible with the built in NCV processor, so I either have to modify the code for the snmp collector to send NCV format or post process the data into the rrds
On 6/22/19 8:54 AM, Jeremy Laidman wrote:
> Great news.
>
> Do you think the typo in the snmpmibs.cfg was causing no RRD files to be generated?
>
>
> On Sun, 23 Jun 2019 at 01:47, Bruce Ferrell <bferrell at baywinds.org <mailto:bferrell at baywinds.org>> wrote:
>
> Hi Jeremy,
>
> Yes, you're correct, the snmpmibs.cfg is an excerpt. It does have the [systemmib] section and that part executes correctly (or seems to) so I left that out. The debug output
> does have the opening snmpmibs part. That shows all of the sections and it's rather lengthy, I did not note errors there.
>
> I've now corrected the error you noted and commented out everything I'm not using in snmpmibs.cfg (should have done that before)...
>
> And I'm now getting columns in the display and RRDs!
>
> I. AM. STOKED!
>
> Now to get the charts working. Once I get that working (some year) I'll write my notes up and submit them as semi-documentation for the feature.
>
> Thanks for the help!
>
>
>
>
> On 6/22/19 7:01 AM, Jeremy Laidman wrote:
>> Bruce
>>
>> Firstly, just to make sure the snmpmibs.cfg you showed is only an excerpt, right? Your snmphosts.cfg file references systemmib and so snmpmibs.cfg must have a [systemmib]
>> section. Your debug output should be saying "Opening file /home/xymon/server/etc/snmpmibs.cfg" but it's not, so I'm hoping you're providing an abridged version of the output.
>>
>> Secondly, I believe there's an error in the snmpmibs.cfg file in the [hrstorage] section. I don't know if this will affect your situation given that your snmphosts.cfg does
>> not reference hrstorage, and your manual run of xymon-snmpcollect does not show any errors along these lines.
>>
>> Anyhow, for the record, I believe this line:
>>
>> keyidx [(HOST-RESOURCES-MIB::hrStorageType]
>>
>> is supposed to be:
>>
>> keyidx [HOST-RESOURCES-MIB::hrStorageType]
>>
>> In the first form, the opening parenthesis has no matching closing parenthesis and I believe it's an extra character that should be removed.
>>
>> Having said all this, your debug output seems to be sending something into Xymon without any problem reported, so the problem may be further down the chain.
>>
>> The xymon-snmpcollect process creates a supplemental client data message to report its findings to Xymon, so have a look at the client data for your host and see if there's
>> an [ifmib] section and that it looks reasonable.
>>
>> The SNMP client data is parsed by xymond - so check xymond.log for errors.
>>
>> From the parsed client data, xymond creates a status message of the form "status hostname.mibname color timestamp <summary>" such as "status hostname.org.ifmib green Sat Jun
>> 22 21:20:19 2019 bla bla". You could use xymond_channel to tap into the status message stream and confirm that there's a status message being generated. You should also see
>> an "ifmib" test appear on the Xymon page containing the hostname.
>>
>> If a status message is generated, it gets picked up by xymond_rrd. If the message is malformed, you might find a message explaining why in the rrd_status.log file. The
>> status message has a particular format so that the RRD parser can turn the text and numbers into RRD data. It should have "Interval=N" (N is likely 300), and "ActiveIP=<IP
>> address>". Then it will have a series of VAR=VAL lines, possibly in sections denoted by square brackets. In the case of the ifmib, the sections are the interface names, and
>> the VAR=VAL lines contain things like ifOctets=NNNNN and ifOperStatus=up (and all the things in the [ifmib] section of the snmpmibs.cfg file.
>>
>> Cheers
>> Jeremy
>>
>> On Sat, 22 Jun 2019 at 14:38, Bruce Ferrell <bferrell at baywinds.org <mailto:bferrell at baywinds.org>> wrote:
>>
>> As a follow on...
>>
>> using tcpdump and snmpget against the data in the dump shows the counters ARE being retrieved, just not registering.
>>
>> snmpget -v 2c -c community666name 127.0.0.1 .1.3.6.1.2.1.31.1.1.1.3.4 -Oa
>>
>> IF-MIB::ifInBroadcastPkts.4 = Counter32: 0
>>
>> tcpdump was run while hand running xymoln-snmpcollect
>>
>>
>>
>> On 6/21/19 9:24 PM, Bruce Ferrell wrote:
>> > OK, I have bug on this now... I have had off an on for a while now
>> >
>> > I have one host in my network NOT being monitored by devmon and I'm trying to use the built in snmp of xymon
>> >
>> > snmphosts.cfg:
>> >
>> > [hostname.org <http://hostname.org>]
>> > version=2
>> > community=community666name
>> > ip=127.0.0.1
>> > systemmib
>> > ifmib=(*)
>> >
>> > snmpmibs.cfg is the file from 4.2.28
>> >
>> > [ifmib]
>> > keyidx (IF-MIB::ifDescr)
>> > keyidx [IF-MIB::ifPhysAddress]
>> > keyidx <IF-MIB::ifName>
>> > validx {IP-MIB::ipAdEntIfIndex}
>> > ifDescr = IF-MIB::ifDescr
>> > ifType = IF-MIB::ifType
>> > ifMtu = IF-MIB::ifMtu
>> > ifSpeed = IF-MIB::ifSpeed
>> > ifPhysAddress = IF-MIB::ifPhysAddress
>> > ifAdminStatus = IF-MIB::ifAdminStatus
>> > ifOperStatus = IF-MIB::ifOperStatus
>> > ifLastChange = IF-MIB::ifLastChange
>> > ifInOctets = IF-MIB::ifInOctets /rrd:COUNTER
>> > ifInUcastPkts = IF-MIB::ifInUcastPkts /rrd:COUNTER
>> > ifInNUcastPkts = IF-MIB::ifInNUcastPkts /rrd:COUNTER
>> > ifInDiscards = IF-MIB::ifInDiscards /rrd:COUNTER
>> > ifInErrors = IF-MIB::ifInErrors /rrd:COUNTER
>> > ifInUnknownProtos = IF-MIB::ifInUnknownProtos /rrd:COUNTER
>> > ifOutOctets = IF-MIB::ifOutOctets /rrd:COUNTER
>> > ifOutUcastPkts = IF-MIB::ifOutUcastPkts /rrd:COUNTER
>> > ifOutNUcastPkts = IF-MIB::ifOutNUcastPkts /rrd:COUNTER
>> > ifOutDiscards = IF-MIB::ifOutDiscards /rrd:COUNTER
>> > ifOutErrors = IF-MIB::ifOutErrors /rrd:COUNTER
>> > ifOutQLen = IF-MIB::ifOutQLen /rrd:GAUGE
>> >
>> > Run by hand as follows:
>> >
>> > ./server/bin/xymon-snmpcollect --debug
>> >
>> > 26951 2019-06-21 21:12:36.952110 Opening file /home/xymon/server/etc/snmphosts.cfg
>> > 26951 2019-06-21 21:12:36.953150 Got key-oid '.1.3.6.1.2.1.2.2.1.2.1' = '"lo"'
>> > 26951 2019-06-21 21:12:36.953381 Got key-oid '.1.3.6.1.2.1.2.2.1.2.2' = '"em1"'
>> > 26951 2019-06-21 21:12:36.953629 Got key-oid '.1.3.6.1.2.1.2.2.1.2.3' = '"em2"'
>> > 26951 2019-06-21 21:12:36.953844 Got key-oid '.1.3.6.1.2.1.2.2.1.2.4' = '"em3"'
>> > 26951 2019-06-21 21:12:36.954081 Got key-oid '.1.3.6.1.2.1.2.2.1.2.5' = '"em4"'
>> > 26951 2019-06-21 21:12:36.954303 Got key-oid '.1.3.6.1.2.1.2.2.1.2.6' = '"br0"'
>> > 26951 2019-06-21 21:12:36.954519 Got key-oid '.1.3.6.1.2.1.2.2.1.2.7' = '"docker0"'
>> > 26951 2019-06-21 21:12:36.954737 Finished host hostname.org <http://hostname.org>
>> > 26951 2019-06-21 21:12:36.966129 No more oids left
>> > 26951 2019-06-21 21:12:36.966137 Finished host hostname.org <http://hostname.org>
>> > 26951 2019-06-21 21:12:36.966258 Transport setup is:
>> > 26951 2019-06-21 21:12:36.966269 xymondportnumber = 1984
>> > 26951 2019-06-21 21:12:36.966274 xymonproxyhost = NONE
>> > 26951 2019-06-21 21:12:36.966278 xymonproxyport = 0
>> > 26951 2019-06-21 21:12:36.966282 Recipient listed as 'XYMON_HOST'
>> > 26951 2019-06-21 21:12:36.966287 Standard protocol on port 1984
>> > 26951 2019-06-21 21:12:36.966292 Will connect to address XYMON_HOST port 1984
>> > 26951 2019-06-21 21:12:36.966463 Connect status is 0
>> > 26951 2019-06-21 21:12:36.966551 Sent 7650 bytes
>> > 26951 2019-06-21 21:12:36.966588 Closing connection
>> >
>> > I get the interface names, but no counters and as a result no RRD entries,and of course, no charting.
>> >
>> > What I want it to do is collect the stats for all of the interfaces and then chart them. I'm suspecting the ifmib definition isn't right if not that, the maybe I need
>> to do
>> > something different with snmphosts.cfg
>> >
>> > Thoughts?
>> >
>> >
>> >
>> > On 5/17/19 2:04 PM, Jeremy Laidman wrote:
>> >> For me, yes.
>> >>
>> >>
>> >> On Fri, 17 May 2019, 17:59 Japheth Cleaver, <cleaver at terabithia.org <mailto:cleaver at terabithia.org> <mailto:cleaver at terabithia.org <mailto:cleaver at terabithia.org>>>
>> wrote:
>> >>
>> >> Other than documentation (obviously), would that be the primary feature
>> >> set that helps makes this a reasonable thing to integrate in officially?
>> >>
>> >> -jc
>> >>
>> >> On 5/16/2019 11:08 PM, Bruce Ferrell wrote:
>> >> > I just figured out there has to be a task... At first I wondered how
>> >> > xymonnet launched xymon-snmpcollector, then I started running it by
>> >> > hand and running tcpdump to see what was being polled
>> >> >
>> >> > What it looks like what we don't get is mib variable manipulation ala
>> >> > devmon... calculated load percentages etc.
>> >> >
>> >> > Still I think a move in the right direction and it directly supports
>> >> > snmp v3
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > On 5/16/19 10:45 PM, Jeremy Laidman wrote:
>> >> >> Not sure what that will give you. The OIDs are extracted from the
>> >> >> file snmpmibs.conf, and I expect you'll have to populate that with
>> >> >> anything you want to monitor.
>> >> >>
>> >> >> One thing I forgot to mention is that you need to create a task to
>> >> >> run the xymon-snmpcollect program every 5 minutes. I created a
>> >> >> tasks.d/xymon-snmpcollect.cfg file containing the following:
>> >> >>
>> >> >> [snmpcollect]
>> >> >> ENVFILE $XYMONHOME/etc/xymonserver.cfg
>> >> >> CMD $XYMONHOME/ext/xymon-snmpcollect --debug
>> >> >> LOGFILE $XYMONSERVERLOGS/xymon-snmpcollect.log
>> >> >> INTERVAL 5m
>> >> >>
>> >> >> Obviously the --debug flag can be removed.
>> >> >>
>> >> >> On Fri, 17 May 2019 at 15:26, Bruce Ferrell <bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>> wrote:
>> >> >>
>> >> >> Just thinking aloud... Since the build uses net-snmp, it should
>> >> >> use the same mibs net-snmp uses... So xymon will know about my
>> >> >> SmartUPS and poweredge.
>> >> >>
>> >> >> I'm gonna have to study the code some more
>> >> >>
>> >> >>
>> >> >>
>> >> >> On 5/16/19 10:08 PM, Jeremy Laidman wrote:
>> >> >> > Right you are. DOSNMP is set to "yes" as a result of SNMP being
>> >> >> set to 1 (and the Net-SNMP tools being found).
>> >> >> >
>> >> >> >
>> >> >> > On Fri, 17 May 2019 at 14:42, Bruce Ferrell
>> >> >> <bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>>> wrote:
>> >> >> >
>> >> >> > On 5/16/19 9:10 PM, Jeremy Laidman wrote:
>> >> >> > > On Fri, 17 May 2019 at 13:36, Bruce Ferrell
>> >> >> <bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>>>> wrote:
>> >> >> > >
>> >> >> > > Yes, I did Jeremy. My apologies.
>> >> >> > >
>> >> >> > >
>> >> >> > > No problem.
>> >> >> > >
>> >> >> > > I did figure out I have to export SNMP=1 then
>> >> >> configure and rebuild
>> >> >> > >
>> >> >> > >
>> >> >> > > Ah, I didn't know that. Or I forgot that.
>> >> >> > >
>> >> >> > > Just looking at the code now - are you sure this isn't
>> >> >> "DOSNMP=1"?
>> >> >> >
>> >> >> >
>> >> >> > The Makefile tests for if $SNMP=1... At least in 4.3.28
>> >> >> >
>> >> >> >
>> >> >> > > What is the tag in the hosts file (if any)?
>> >> >> > >
>> >> >> > >
>> >> >> > > Nothing. The hostnames are found by xymon-snmpcollect in
>> >> >> the snmphosts.cfg. You still need the hosts to be in hosts.cfg, but
>> >> >> not tags are required.
>> >> >> >
>> >> >> > > Jeremy
>> >> >> >
>> >> >> > Thanks again!
>> >> >> >
>> >> >> >
>> >> >> > > On 5/16/19 6:41 PM, Jeremy Laidman wrote:
>> >> >> > > > If you meant to say, "Hey Jeremy" then the answer
>> >> >> is, that it's all stuff for Xymon.
>> >> >> > > >
>> >> >> > > > On Fri, 17 May 2019 at 11:15, Bruce Ferrell
>> >> >> <bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>>>
>> >> >> > <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>> <mailto:bferrell at baywinds.org
>> <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>
>> >> >> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org> <mailto:bferrell at baywinds.org <mailto:bferrell at baywinds.org>>>>>>> wrote:
>> >> >> > > >
>> >> >> > > > Hey Josh, I saw that before. Is that stuff
>> >> >> that devmon looks at or stuff for xymon.
>> >> >> > > >
>> >> >> > > > I'm not at all clear
>> >> >> > > >
>> >> >> > > > Thanks in advance
>> >> >> > > >
>> >> >> > > > On 5/16/19 6:00 PM, Jeremy Laidman wrote:
>> >> >> > > >> Xymon already has code for SNMP that works,
>> >> >> but isn't documented. I have it working for me, but it required a
>> >> >> fair bit or digging to find the right
>> >> >> > configuration. I've
>> >> >> > > >> posted on this previously; might help:
>> >> >> https://lists.xymon.com/archive/2019-March/046191.html
>> >> >> > > >>
>> >> >> > > >> J
>> >> >> > > >>
>> >> >> > > >> On Thu, 16 May 2019 at 19:26, Bruno Manzoni
>> >> >> <bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> > <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>
>> >> >> > > <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch
>> <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>>>> wrote:
>> >> >> > > >>
>> >> >> > > >> Thanks you Josh,
>> >> >> > > >>
>> >> >> > > >> Yes I know about devmon (I put my own
>> >> >> devmon version which is a try to be a consolidate version)
>> >> >> > > >>
>> >> >> > > >> In fact, I just would like to know if
>> >> >> there was another SNMP development (but it seems not as you say it
>> >> >> will be merged) inside Xymon . (I am thinking
>> >> >> a way to
>> >> >> > > integrate
>> >> >> > > >> SNMP v3, but it do not uses the current
>> >> >> SNMP_session perl lib as it is not supported within this lib)?
>> >> >> > > >>
>> >> >> > > >> Regards
>> >> >> > > >>
>> >> >> > > >> Bruno Manzoni
>> >> >> > > >> (Bonomani)
>> >> >> > > >>
>> >> >> > > >>
>> >> >> > > >> Le 14.05.2019 à 15:20, Josh Luthman a écrit :
>> >> >> > > >>> You can just use Devmon these days.
>> >> >> > > >>>
>> >> >> > > >>> I've seen nothing to suggest the projects
>> >> >> will be merged.
>> >> >> > > >>>
>> >> >> > > >>> Josh Luthman
>> >> >> > > >>> Office: 937-552-2340
>> >> >> > > >>> Direct: 937-552-2343
>> >> >> > > >>> 1100 Wayne St
>> >> >> > > >>> Suite 1337
>> >> >> > > >>> Troy, OH 45373
>> >> >> > > >>>
>> >> >> > > >>>
>> >> >> > > >>> On Fri, May 10, 2019 at 12:33 PM Bruno
>> >> >> Manzoni <bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> > <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>
>> >> >> > > <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch
>> <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>
>> >> >> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch> <mailto:bruno.manzoni at ubi-network.ch <mailto:bruno.manzoni at ubi-network.ch>>>>>>> wrote:
>> >> >> > > >>>
>> >> >> > > >>> Hello,
>> >> >> > > >>>
>> >> >> > > >>> Is there any plan to have SNMP
>> >> >> include with a new version of xymon? If
>> >> >> > > >>> yes, what is the current state?
>> >> >> >
>> >> >>
>> >> >
>> >> > _______________________________________________
>> >> > Xymon mailing list
>> >> > Xymon at xymon.com <mailto:Xymon at xymon.com> <mailto:Xymon at xymon.com <mailto:Xymon at xymon.com>>
>> >> > http://lists.xymon.com/mailman/listinfo/xymon
>> >>
>> >>
>> >
>> > _______________________________________________
>> > Xymon mailing list
>> > Xymon at xymon.com <mailto:Xymon at xymon.com>
>> > http://lists.xymon.com/mailman/listinfo/xymon
>> >
>> >
>> > _______________________________________________
>> > Xymon mailing list
>> > Xymon at xymon.com <mailto:Xymon at xymon.com>
>> > http://lists.xymon.com/mailman/listinfo/xymon
>> >
>>
>
when t
More information about the Xymon
mailing list