[Xymon] xymon at xymon.com

[Steffan]

Hello Damien,

There is a little bug in the script

/usr/sbin/hpacucli ctrl all show config | grep drive
      logicaldrive 1 (273.4 GB, RAID 1+0, OK)
      physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 146.8 GB, OK)
      physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 146.8 GB, OK)
      physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 146.8 GB, OK)
      physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 146.8 GB, OK)
      physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 146.8 GB, OK, spare)

/usr/sbin/hpacucli ctrl all show config | grep drive | awk '{print $NF}' | sed s/\)//
OK
OK
OK
OK
OK
Spare


So the sparedisk is reported as bad 😊

My change below:
        STATUS=$(echo $OUTPUT | awk '{print $NF}' | sed s/\)//)

        if [ "$STATUS" == "spare" ] ; then
                STATUS=$(echo $OUTPUT | cut -d',' -f4 | sed 's/ //g')
        fi
        

-----Oorspronkelijk bericht-----
Van: Steffan <mailinglist at tikklik.nl> 
Verzonden: donderdag 11 oktober 2018 16:22
Aan: 'xymon at xymon.com' <xymon at xymon.com>
Onderwerp: xymon at xymon.com

Hello Damien,

I treid your script.
When running in testmode it works fine.
It is creating /var/lib/xymon/tmp/xymon-hardware.msg

But when running as a deamon i am getting 
/bin/cat: /var/lib/xymon/tmp/xymon-hardware.msg: No such file or directory

Any idees?


Steffan

-----Oorspronkelijk bericht-----


Hi Théo,

With all due modesty, I wrote something that could match with your expectations :
https://wiki.xymonton.org/doku.php/monitors:hardware_sensors


Regards,
Damien Martins