[Xymon] Xymon Alerts conf file

[White, Bruce]

A couple of things:


1)      The host name in the alerts.cfg needs to match the host name in the hosts.cfg.   If hosts.cfg has a domain, then alerts needs, it.

2)      You have no COLOR= parm specified in your alert, so it will not when to send an alert.  If you add COLOR=red after SERVICE=cpu, …  the alert process will know to send an alert when one of those services turns red.
…….Bruce





Bruce White

Senior Enterprise Systems Engineer  | Phone: 1-630-671-5169    | BeWhite at fellowes.com  |  <http://www.fellowes.com> www.fellowesbrands.com<https://www.fellowesbrands.com>



[cid:image7ffe8a.PNG at 35b2d12e.48a8cc35]



Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.


From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Valentin, Robert
Sent: Tuesday, March 14, 2017 10:56 AM
To: xymon at xymon.com
Subject: [Xymon] Xymon Alerts conf file

Hi:

I’m Robert Valentin and we installed the Xymon server on a Linux machine and a client on a mainframe running VSE
and the browser on the Linux server is reporting OK the alerts (yellow and red) for both hosts defined on the hosts.cfg.

The mainframe system programmer bring down a CICS and create a 90% disk utilization and is reported fine on the webpage.

I configure the sendmail service to received alerts thru emails defined on the alerts.cfg but I’m only receiving emails from
the Xymon Server not for the client alerts from VSETEST.

Here’s the alerts.cfg parameters set.

[cid:image001.png at 01D29CDA.25F85140]

I execute the xymoncmd xymond_alert –test VSETEST disk and it founds a red alert on disk validate the rule to use on the alerts.cfg
file but no email is received.

Does hostnames on the hosts.cfg need a the domain ID? Instead of VSETEST do I need to change the line to VSETEST.firstbank.local?

Also try leaving only the HOST=VSETEST and inactivate the HOST=FBA06120.firstbank.local and no results.

I will appreciate any help on this matter.

Thanks,
Robert
The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20170314/07991ebb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 10454 bytes
Desc: image001.png
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20170314/07991ebb/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image7ffe8a.PNG
Type: image/png
Size: 4398 bytes
Desc: image7ffe8a.PNG
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20170314/07991ebb/attachment-0001.png>