[Xymon] xymon powershell client

[Raymond, David]

Hi Zak,

Thanks for the reply. I have a question about CPU load.
I get red for my SQL server, but the load is 16%.

Normally, I get red when it's overt 75%. 
I see in "processruntime" how to setup the threshold, but can I use it for all process or I need to list each of them ?

The learning curve from bbwin to xymonPS is not easy for me ...

thanks

David
-----Original Message-----
From: zak.beck at accenture.com [mailto:zak.beck at accenture.com] 
Sent: Monday, January 9, 2017 10:31 AM
To: Raymond, David <David.Raymond at ca.ebarrette.com>; me at tdiehl.org
Cc: xymon at xymon.com
Subject: RE: [Xymon] xymon powershell client

Hi David

The external directive is used in client-local.cfg, not the client-side XML file.

One of the key differences between bbwin and XymonPSClient is that you have the option to push configuration from the Xymon server via client-local.cfg, rather than being configured on the client side.

This is a major advantage as you can control the configuration centrally.

You could create a local client-local.cfg and switch the option off to use the remote (Xymon) client-local.cfg, but I wouldn't recommend it.

Zak

-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Raymond, David
Sent: 09 January 2017 14:19
To: me at tdiehl.org
Cc: xymon at xymon.com
Subject: Re: [Xymon] xymon powershell client

I'm looking at the xml config file, about the external script, what do I need to run something like "  external:everyscan:sync:fsmon.vbs "
The other value have each <test></test>

I do add "  externalscriptlocation>c:\scripts</externalscriptlocation> "

Thanks

David Raymond
-----Original Message-----
From: me at tdiehl.org [mailto:me at tdiehl.org]
Sent: Sunday, January 8, 2017 9:01 AM
To: Raymond, David <David.Raymond at ca.ebarrette.com>
Cc: xymon at xymon.com
Subject: Re: [Xymon] xymon powershell client

On Fri, 6 Jan 2017, Raymond, David wrote:

> I try to find were I can download the latest package of Xymon client 
> PowerShell.
> Normally I use bbwin 0.13, but I want to look at the PowerShell.

WinPSClient works and is maintained. It can be found @ https://urldefense.proofpoint.com/v2/url?u=http-3A__svn.code.sf.net_p_xymon_code_sandbox_WinPSClient&d=DgIGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=rnonCHukR9RISqBkM8T01IA9jPhtQ4C_tyzfBYbAuW8&s=4eKO57q0kRLxksMBDsC3eMqA7Ek2HCht7QpG4hrRvU0&e=

If you have svn installed the following command will download it for you:
"svn checkout
https://urldefense.proofpoint.com/v2/url?u=http-3A__svn.code.sf.net_p_xymon_code_sandbox_WinPSClient&d=DgIGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=rnonCHukR9RISqBkM8T01IA9jPhtQ4C_tyzfBYbAuW8&s=4eKO57q0kRLxksMBDsC3eMqA7Ek2HCht7QpG4hrRvU0&e=
."

> Some bbwin client failed for no reason, and I get purple alerts.

Best I can tell bbwin is dead and suffering from bit rot.

Regards,

-- 
Tom			me at tdiehl.org		Spamtrap address	 		me123 at tdiehl.org
_______________________________________________
Xymon mailing list
Xymon at xymon.com
https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DgIGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=rnonCHukR9RISqBkM8T01IA9jPhtQ4C_tyzfBYbAuW8&s=aj5GtR2khrg_ni-0LNdOjiq_o-ZacV7UUKyae_fiUsQ&e=