[Xymon] Support for ZFS?

[Novosielski, Ryan]

These things are configured now in $XYMONCLIENT/bin/xymonclient-$OSTYPE.sh.

--
____ *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences*
 || \\UTGERS      |---------------------*O*---------------------
 ||_// Biomedical | Ryan Novosielski - Sr. Systems Programmer
 || \\ and Health | novosirj at rutgers.edu - 973/972.0922 (2x0922)
 ||  \\  Sciences | OIT/EI-Academic Svcs. - ADMC 450, Newark
      `'
________________________________________
From: Xymon [xymon-bounces at xymon.com] On Behalf Of Scott, Brian [brian.scott4 at det.nsw.edu.au]
Sent: Tuesday, March 11, 2014 2:40 AM
To: Root, Paul T; 'Lists'; 'xymon at xymon.com'
Subject: Re: [Xymon] Support for ZFS?

Also seems to work OK on FreeBSD. The pool shows up on the graphs as a separate device which should probably be excluded rather than doubling up. This means that xymon doesn't have anything against zfs in other environments.

Maybe the disk type needs to be included somewhere on your system?

Regards,

Brian Scott

-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Root, Paul T
Sent: Tuesday, 11 March 2014 1:30 PM
To: 'Lists'; 'xymon at xymon.com'
Subject: Re: [Xymon] Support for ZFS?

It does in Solaris. You may need to go take the code of out of the script in Solaris and put it in your machine's script.

-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Lists
Sent: Monday, March 10, 2014 8:03 PM
To: xymon at xymon.com
Subject: [Xymon] Support for ZFS?

Xymon 4.3.7 doesn't seem to report on partitions created/mounted on ZFS.

Here's some sample output from df:

[root at hume db2]# df
Filesystem            1K-blocks       Used   Available Use% Mounted on
/dev/sdh2              20161204    3285836    15851228  18% /
tmpfs                   1461616          0     1461616   0% /dev/shm
/dev/sdh1                101086      71234       24633  75% /boot
/dev/sdm1            2884252924 2605050008   249900596  92% /media/a2012
bpart/db1            2995879424  728979328  2266900096  25% /bpart/db1
zfspool             12188961408        384 12188961024   1% /zfspool
zfspool/db          13033537920  844576896 12188961024   7% /mnt/db
zfspool/host          209715200   50983680   158731520  25% /backups/host

Is there a recommended way to set up support for ZFS? I'm not looking
for anything elaborate; simple reporting of free space as is the default
for other FS types would be fine for my needs.

-Ben
_______________________________________________
Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon
_______________________________________________
Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon
**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************
_______________________________________________
Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon