[Xymon] RPM bulid for 4.3.10 client mode
cleaver at terabithia.org
cleaver at terabithia.org
Thu May 16 23:21:58 CEST 2013
> I'm trying to make an RPM on RedHat. Specifically for the client.
>
> It spends a bunch of time building, then comes up with this:
>
> Installation complete.
>
> You must configure your webserver for the Xymon webpages and CGI-scripts.
> A sample Apache configuration is in
> /usr/lib64/xymon/server/etc/xymon-apache.conf
> If you have your Administration CGI scripts in a separate directory,
> then you must also setup the password-file with the htpasswd command.
>
> To start Xymon, as the xymon user run
> '/usr/lib64/xymon/server/bin/xymon.sh start'
> To view the Xymon webpages, go to http://stnxymdev/xymon
> + mkdir -p /tmp/xymon-root/etc/init.d
> + cp /home/ptroot/localRPMS/SOURCES/xymon-init.d
> /tmp/xymon-root/etc/init.d/xymon
> + cp /home/ptroot/localRPMS/SOURCES/xymon-client.init
> /tmp/xymon-root/etc/init.d/xymon-client
> + mkdir -p /tmp/xymon-root/etc/logrotate.d
> + cp /home/ptroot/localRPMS/SOURCES/xymon.logrotate
> /tmp/xymon-root/etc/logrotate.d/xymon
> + mkdir -p /tmp/xymon-root/etc/default
> + cp /home/ptroot/localRPMS/SOURCES/xymon-client.default
> /tmp/xymon-root/etc/default/xymon-client
> + mkdir -p /tmp/xymon-root/usr/bin
> + cd /tmp/xymon-root/usr/bin
> + ln -sf ../lib/xymon/server/bin/xymon ../lib/xymon/server/bin/xymoncmd .
> + mkdir -p /tmp/xymon-root/etc/httpd/conf.d
> + mv /tmp/xymon-root/etc/xymon/xymon-apache.conf
> /tmp/xymon-root/etc/httpd/conf.d/
> mv: cannot stat `/tmp/xymon-root/etc/xymon/xymon-apache.conf': No such
> file or directory
> error: Bad exit status from /var/tmp/rpm-tmp.66715 (%install)
>
>
> So I went back and reconfigured for the server, and put the config in
> place. But it comes back the same.
>
> Any ideas what's going on here?
>
> Thanks,
> Paul.
>
Seems like the ./configure.client didn't get passed on properly. Is this
the .spec included in the tarball or custom-written?
After setting options (via environment or whatnot) all you should need is:
./configure.client
make PKGBUILD=1 client
Regards,
-jc
More information about the Xymon
mailing list