[Xymon] xymon client make error solaris 10: No rule to make target `../lib/xymonclient.a', needed by `../client/xymond_client'

Barreca Daniele fleano at gmail.com
Thu Jan 24 18:51:46 CET 2013


Dear Roland,
thank you very much for your help, following your instruction I 
successfully compiled the client. Finally I could start enjoying on 
creating my monitor scripts.

Kind regards,
  Daniele Barreca


On 22/01/13 22:08, Roland Soderstrom wrote:
>
> This is my rude procedure for compiling on Solaris.
>
> I compiled several versions on Solaris, there is a few trick that you 
> need to know.
>
> For the server compilation you need a bunch of SUN freeware packages, 
> I just use the same host for a client package, probably less deps for 
> client only.
>
> On the client itself you need some of these installed as well.
>
> Same procedure for x86.
>
> If you use blastwave packages it is a bit different....
>
> www.sunfreeware.com
>
> binutils (SMCbinut)
>
> db (SMCdb47)
>
> freetype (SMCftype)
>
> gcc (SMCgcc)
>
> libart_lgpl (SMClibart)
>
> libpng (SMClibpng)
>
> libtool (SMClibt)
>
> libiconv (SMCliconv)
>
> libintl (SMClintl)
>
> make (SMCmake)
>
> openldap (SMColdap)
>
> openssl (SMCossl)
>
> pcre (SMCpcre)
>
> rrdtool (SMCrrdt)
>
> sasl (SMCsasl)
>
> zlib (SMCzlib)
>
> setup compiling env.
>
> groupadd -g 1001 xymon
>
> useradd -u 62001 -g 1001 -d /usr/local/xymon -m -s /usr/bin/bash -c 
> "Xymon Owner" xymon
>
> This is for rrdtool, some strange dep, maybe not necessary for client 
> as it doesn't need rrdtool. ( this will force use of gnu ld)
>
> mv /usr/ccs/bin/ld /usr/ccs/bin/ld.orig
>
> export PATH=/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
>
> crle -u -l /usr/local/lib
>
> crle -u -l /usr/local/rrdtool-1.2.19/lib
>
> umask 022
>
> cd /var/tmp
>
> cp <xymon source from somewhere> /var/tmp
>
> gunzip xymon-4.3.10.tar.gz
>
> tar xf xymon-4.3.10.tar
>
> cd xymon-4.3.10
>
> which make
>
> /usr/local/bin/make
>
> which ld
>
> /usr/local/bin/ld
>
> ./configure
>
> make
>
> make install         (this step as root)
>
> - Roland
>
> *From:*xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On 
> Behalf Of *Barreca Daniele
> *Sent:* Tuesday, 22 January 2013 10:02 PM
> *To:* xymon at xymon.com
> *Subject:* [Xymon] xymon client make error solaris 10: No rule to make 
> target `../lib/xymonclient.a', needed by `../client/xymond_client'
>
> Hi everyone,
> I am trying to compile xymon 4.3.10 on a Solaris 10 SPARC 64bit server.
> When i run make, after a while the compilation stops with the 
> following error:
>
> ...
> xymond_client.c: In function `nextsection':
> xymond_client.c:216: warning: dereferencing type-punned pointer will 
> break strict-aliasing rules
> gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE 
> -D_FILE_OFFSET_BITS=64 -DSunOS 
> -I/export/home/xymon/xymon-4.3.10/include -DCLIENTONLY=1 
> -DLOCALCLIENT=1 -I/usr/local/include -c -o xymond_worker.o xymond_worker.c
> gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE 
> -D_FILE_OFFSET_BITS=64 -DSunOS 
> -I/export/home/xymon/xymon-4.3.10/include -DCLIENTONLY=1 
> -DLOCALCLIENT=1 -I/usr/local/include -c -o xymond_buffer.o xymond_buffer.c
> gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE 
> -D_FILE_OFFSET_BITS=64 -DSunOS 
> -I/export/home/xymon/xymon-4.3.10/include -DCLIENTONLY=1 
> -DLOCALCLIENT=1 -I/usr/local/include -c -o client_config.o client_config.c
> make[1]: *** No rule to make target `../lib/xymonclient.a', needed by 
> `../client/xymond_client'.  Stop.
> make[1]: Leaving directory `/export/home/xymon/xymon-4.3.10/xymond'
> make: *** [xymond-client] Error 2
>
> The ./configure.client report a
>     Checking for clock_gettime() requiring librt ...
>     clock_gettime() requires librt
> I checked for librt libraries in /lib, they are there and in /usr/lib 
> also, my LD_LIBRARY_PATH is correctly set (at least, I think so) and 
> libpcre is installed.
> Then, googleing I found a suggestion about adding
> LIBRTDEF="-lrt" in build/Makefile.rules
> I did it, but nothing changed.
>
> Can anyone help me investigating the error.
>
> Kind regards,
>  Daniele Barreca
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20130124/5de930e3/attachment.html>


More information about the Xymon mailing list