[Xymon] xymon polling periods

[John D. Alexander]

I created a definitions in rrddefinitions.cfg, but it doesn't appear to do anything.  A dump of the rrd file shows that it has taken the default configuration (5 minute step).

I'll check the rrdcreate man page then..  Thanks Henrik.

John Alexander

-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Henrik Størner
Sent: Friday, August 16, 2013 10:58 PM
To: xymon at xymon.com
Subject: Re: [Xymon] xymon polling periods

On 16-08-2013 21:30, John D. Alexander wrote:
> A couple of questions about Xymon capabilities.
>
> -Can Xymon handle hosts that cannot be contacted by the server?  I 
> will have hosts reporting in, but won't know the IP and cannot connect 
> to them.  Status reports will actually come from a central agent 
> rather than from the devices

Works fine. As long as your central agent sends data using the Xymon syntax of "status HOSTNAME.TESTNAME ..." then you can send data on any server.

There are no checks in Xymon on the source of a status message. You can enable an IP check with the --status-senders option so you probably do
*not* want to enable this.

If you cannot ping the hosts from Xymon, add the "noconn" option in hosts.cfg to disable the ping check.


> -Can Xymon handle multiple different polling periods - specifically with
> RRD?  Some devices check in every minute.  Some check in every 2
> minutes.  Some every 5 minutes.

Short answer: It will work, as long as you send updates at least every 
10 minutes. The RRD files will just discard the extra updates.

The longer answer: RRD files have two settings telling them how often 
updates arrive - 'heartbeat' and 'step' - and Xymon sets these to 10 and 
5 minutes, respectively. Which means that you *must* update the RRD at 
least every 10 minutes for it to regard any of the data as valid; and if 
you don't update exactly every 5 minutes, then RRD will extrapolate your 
data and compute what the value would have been if it had arrived 
exactly on the 5 minute mark.

You can configure these - on a "per-status-name" basis - in the 
rrddefinitions.cfg file (although I've had some reports that it may be 
buggy). But that is for defining a specific set of RRD files that have 
different polling periods - not for some hosts reporting the same type 
of data at different intervals than others.

It really is an RRD thing, so I would recommend that you look at the 
"rrdcreate" man-page - especially the section on "The HEARTBEAT and the 
STEP" - if things don't work as expected.


Regards,
Henrik

_______________________________________________
Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon