[Xymon] Devmon - scalability ?

[Nicolas Lienard]

Hello

I tried 80 but it was spending too much time also (>800 sec).
Will play with cycle time tomorrow to see if it helps.
About discovery it runs ony once per day and forcing the template and community will speed up only the discovery.

Thanks!
Cheers
Nico




Le 17 sept. 2012 à 08:14, Jeremy Laidman <jlaidman at rebel-it.com.au> a écrit :

> On 16 September 2012 22:13, Nico <nicolas at lienard.name> wrote:
> we got a xymon server polling ~ 8100 network devices (mainly cisco).
> devmon is used as well but the polling period is high: > 600 sec. (10 mn ).
> some purple are coming/leaving randomly :(
> 
> i m wondering if any people here have some tuning recommendations to have a better polling time (less than 300 sec  idealy).
> for the moment, NUMFORKS is 60 (default 10) .
> 
> Have you tried increasing numforks beyond 60?
> 
> Have you tried decreasing cycletime (default is 60 seconds)?  This determines how log a fork will wait until looking for more work to do, so if it's too large, there will be work in the queue waiting to be processed for a long time, with a bunch of sleeping forks doing nothing.
> 
> maybe running a second devmon instance on the same server could be better.
> 
> You could try this.  But I don't see how this could be any better than increasing numforks.  If anything, it could be worse, especially if you don't separate the work.
> 
> Ensure you define cid() and model() in hosts.cfg for every host with "DEVMON:".  For optimal efficiency, the following should produce no output:
> 
>   $ xymoncmd xymongrep 'devmon*'|egrep -v "cid.*model|model.*cid"
> 
> Cheers
> Jeremy
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20120917/ba772bd0/attachment.html>