[Xymon] custom graphs problem

[jef.jagers at thomsonreuters.com]

Hi Chris,

 

Thank you for you reply.

Changed it to 

[ThreadCount]

        TITLE ThreadsCount Info

        YAXIS Threads

        DEF:threadcount=ThreadCount.rrd:openthreads:AVERAGE

        LINE2:threadcount#0000FF:openthreads

        COMMENT:\n

        GPRINT:openthreads:LAST:openthreads %5.1lf%s (cur) \:

        GPRINT:openthreads:MAX: %5.1lf%s (max) \:

        GPRINT:openthreads:MIN: %5.1lf%s (min) \:

        GPRINT:openthreads:AVERAGE: %5.1lf%s (avg)\n

 

But still no graphs are shown.

 

I based the creation of the graph on the example that is shown on
following site:

http://www.xymon.com/xymon/help/howtograph.html

Met vriendelijke groeten, 

Jef Jagers
Systems Engineer
Thomson CompuMark

 

Thomson Reuters

 

From: Chris.Morris at rwe.com [mailto:Chris.Morris at rwe.com] 
Sent: maandag 26 maart 2012 16:56
To: Jagers, Jef (TR Technology)
Cc: xymon at xymon.com
Subject: RE: [Xymon] custom graphs problem

 

Jef,

 

Look at your garaph definition :-

 

you have a space in LINE2 > open threads

 

and you have defined (DEF) threadcount but are trying to graph "open".

 

HTH,

Chris

	 

	
________________________________


	From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com]
On Behalf Of jef.jagers at thomsonreuters.com
	Sent: 26 March 2012 15:18
	To: xymon at xymon.com
	Subject: [Xymon] custom graphs problem

	Hi All,

	 

	After half a day searching for the problem, why my custom graph
for my test isn't showing properly in xymon, I'm reaching out to you
guys.

	I have googled quite a bit but none of the explanations and/or
suggestions (which I all tried) are working for me.

	It is probably something stupid I'm missing or doing wrong but
I'm not able to put my finger on it.

	 

	Version: Xymon:              4.3.7

	Rrd version:                        rrdtool-1.2.12-13.2

	 

	Problem:

	I have a custom scripts, that runs about every 5 min, that gives
following output in xymon: (the open threads line shows as a separate
line in the source html)

	The number of open threads can vary from 0-500.

	_________________________

	Hostname - ThreadCount

	 

	Mon Mar 26 15:48:05 CEST 2012

	 

	open threads : 41

	 

	Status unchanged in 4 hours, 35 minutes

	Status message received from xx.xxx.xxx.xxx

	__________________________

	 

	I added the necessary in xymonserver.cfg and it looks like this:

	_________________________________

	
TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,
<......more.....>,ThreadCount=ncv, <......more.....>,xymond"

	 

	NCV_ThreadCount="openthreads:GAUGE"

	 

	GRAPHS="la,disk, <......more.....>,ncv,
<......more.....>,ThreadCount"

	________________________________

	 

	I added the required to graphs.cfg and it looks like this:

	_________________________________

	                [ThreadCount]

	                                 TITLE ThreadsCount Info

	                                YAXIS Threads

	
DEF:threadcount=ThreadCount.rrd:openthreads:AVERAGE

	                                LINE2:threadcount#0000FF:open
threads

	                                COMMENT:\n

	                                GPRINT:open:LAST:open threads \:
%5.1lf%s (cur)

	                                GPRINT:open:MAX: \: %5.1lf%s
(max)

	                                GPRINT:open:MIN: \: %5.1lf%s
(min)

	                                GPRINT:open:AVERAGE: \: %5.1lf%s
(avg)\n

	
_________________________________

	 

	Below is the upper most part of a rrdtool dump of the rrd file
that gets created succefully. (ThreadCount.rrd):

	___________________

	<!-- Round Robin Database Dump -->

	<rrd>

	                                                <version> 0003
</version>

	                                                <step> 300
</step> <!-- Seconds -->

	                                                <lastupdate>
1332770292 </lastupdate> <!-- 2012-03-26 15:58:12 CEST -->

	 

	                                                <ds>

	
<name> openthreads </name>

	
<type> GAUGE </type>

	
<minimal_heartbeat> 600 </minimal_heartbeat>

	 

	
<!-- PDP Status -->

	
<last_ds> UNKN </last_ds>

	
<value> 7.8720000000e+03 </value>

	
<unknown_sec> 0 </unknown_sec>

	                                                </ds>

	.....

	________________

	 

	I tried several stuff to change the output of  my script
(open_threads, openthreads), but that changed nothing. (I did restart
xymon numerous times after removing the created rrd files)

	Per info: I started with following site:
http://www.xymon.com/xymon/help/howtograph.html

	 

	All suggestions are appreciated.

	 

	Regards, 

	Jef

	 

************************************************************************
**** 

The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient,
you are hereby notified that you have received this document in error
and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any). 

 

************************************************************************
***** 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20120328/7d899e63/attachment.html>