SV: Fwd: [xymon] msgs : always green instead of configuring for errors

[Carl Melgaard]

Hi,

Did you try what Dominique Frise suggested:

You may want to try:

LOG /var/log/messages  %(?-i)lockup COLOR=red

Regards,

Carl Melgaard

________________________________
Fra: akshar bhosale [mailto:akshar.bhosale at gmail.com]
Sendt: 16. februar 2011 06:12
Til: xymon at xymon.com
Emne: Fwd: Fwd: [xymon] msgs : always green instead of configuring for errors

Hi,

after changing the settings, same issue is coming. i ama getting those messages inside msgs tab but color is always remains green.
kindly help me.

-akshar
---------- Forwarded message ----------
From: Dominique Frise <dominique.frise at unil.ch<mailto:dominique.frise at unil.ch>>
Date: Mon, Feb 14, 2011 at 6:46 PM
Subject: Re: Fwd: [xymon] msgs : always green instead of configuring for errors
To: xymon at xymon.com<mailto:xymon at xymon.com>

On 02/14/11 01:43 PM, akshar bhosale wrote:
Hi,
     Thank you for pointing the mistake; but even after changing the
setting, it is not working. Here are my changed settings in
hobbit-clients.cfg
Hosts are host1.abc.pqr.xyz----host50.abc.pqr.xyz
HOST=%.*.abc.pqr.xyz
LOG /var/log/messages lockup COLOR=red

DEFAULT
        # These are the built-in defaults.
        UP      1h
        LOAD    18.0 20.0
        DISK    * 90 95
        MEMPHYS 100 101
        MEMSWAP 50 80
        MEMACT  90 97

Even after restarting server and client, it is showing the same behaviour.
Kindly let me know i

-akshar
---------- Forwarded message ----------
From: *pankaj dorlikar* <pankaj.dorlikar at gmail.com<mailto:pankaj.dorlikar at gmail.com>
<mailto:pankaj.dorlikar at gmail.com<mailto:pankaj.dorlikar at gmail.com>>>
Date: Mon, Feb 14, 2011 at 6:05 PM
Subject: Re: [xymon] msgs : always green instead of configuring for errors
To: akshar.bhosale at gmail.com<mailto:akshar.bhosale at gmail.com> <mailto:akshar.bhosale at gmail.com<mailto:akshar.bhosale at gmail.com>>


On Mon, Feb 14, 2011 at 12:00 PM, Henrik Størner <henrik at hswn.dk<mailto:henrik at hswn.dk>
<mailto:henrik at hswn.dk<mailto:henrik at hswn.dk>>> wrote:

   In <AANLkTikfYsvxA4dTTgTVrhQCFGG-vMQOAZ8XbvJHc_57 at mail.gmail.com<mailto:AANLkTikfYsvxA4dTTgTVrhQCFGG-vMQOAZ8XbvJHc_57 at mail.gmail.com>
   <mailto:AANLkTikfYsvxA4dTTgTVrhQCFGG-vMQOAZ8XbvJHc_57 at mail.gmail.com<mailto:AANLkTikfYsvxA4dTTgTVrhQCFGG-vMQOAZ8XbvJHc_57 at mail.gmail.com>>>

   akshar bhosale <akshar.bhosale at gmail.com<mailto:akshar.bhosale at gmail.com>
   <mailto:akshar.bhosale at gmail.com<mailto:akshar.bhosale at gmail.com>>> writes:

    >i am using xymon 4.2.2. I want that each client should show msgs
   red if
    >lockup word comes in /var/log/messages.

    >~xymon/server/etc/hobbit-clients.cfg
    >DEFAULT
    >        # These are the built-in defaults.
    >        UP      1h
    >        LOAD    18.0 20.0
    >        DISK    * 90 95
    >        MEMPHYS 100 101
    >        MEMSWAP 50 80
    >        MEMACT  90 97
    >        PROC cron
    >        PROC /opt/PBS/bin/myscript.sh
    >        LOG /var/log/messages lockup COLOR=red

   You should Never, Ever, put PROC and LOG settings in the
   DEFAULT section.

   Move them into a "HOST=*" section, before the DEFAULT one.


   Regards,
   Henrik


   To unsubscribe from the xymon list, send an e-mail to
   xymon-unsubscribe at xymon.com<mailto:xymon-unsubscribe at xymon.com> <mailto:xymon-unsubscribe at xymon.com<mailto:xymon-unsubscribe at xymon.com>>
You may want to try:

LOG /var/log/messages  %(?-i)lockup COLOR=red



>From hobbit-clients.cfg(5):
...
                                        Note that Xymon defaults
    to  case-insensitive  pattern  matching; if that is not what
    you want, put  "(?-i)"  between  the  "%"  and  the  regular
    expression to turn this off. E.g. "%(?-i)WARNING" will match
    the word WARNING only when it is upper-case.
...

Dominique


To unsubscribe from the xymon list, send an e-mail to
xymon-unsubscribe at xymon.com<mailto:xymon-unsubscribe at xymon.com>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20110216/e73f2137/attachment.html>