[xymon] New UPS monitor added to Xymonton

[Josh Luthman]

Never mind, missing the name of my UPS on hobbitgraphs.

How does one put multiple UPS on a single graph, though?  I'm looking
at the disk statement and I don't see where a second rrd file comes in
to play.  Is it necessary for one graph to load from one rrd file?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Wed, Jul 28, 2010 at 2:41 PM, Josh Luthman
<josh at imaginenetworksllc.com> wrote:
> I am having an issue with the graphs.  Is it possible the RRD was
> created without supporting of two decimal places?
>
> They are being referenced on their pages but the image does not show
> up.  The RRD files exist and do have values:
>
> -> rrdtool dump out-voltage.rrd |grep "name\|type\|last_ds"
>                <name> 111111111</name>
>                <type> GAUGE </type>
>                <last_ds> 119.00 </last_ds>
>                <name> 222222222</name>
>                <type> GAUGE </type>
>                <last_ds> 121.00 </last_ds>
>                <name> 33333333333</name>
>                <type> GAUGE </type>
>                <last_ds> 120.00 </last_ds>
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
>
> On Wed, Jul 28, 2010 at 12:59 PM, Josh Luthman
> <josh at imaginenetworksllc.com> wrote:
>> That fixed it!  Thank you!
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Wed, Jul 28, 2010 at 12:46 PM, Bill Arlofski <waa-hobbitml at revpol.com>
>> wrote:
>>>
>>> On 07/28/10 12:29, Josh Luthman wrote:
>>> >  >Unless I am mistaken, the test I wrote will be set the status to
>>> > yellow if
>>> > the
>>> >> UPS load is greater than or equal to $yellowtest (80%) and the status
>>> >> will
>>> > be
>>> >> set to red if the UPS load is eualto or greater than $redtest (80%).
>>> >
>>> > While this may be your intention that is not what I'm seeing.  I am
>>> > getting
>>> > a red condition with these loads.
>>> >
>>> > - UPS load % for apcxxxxxr01 apcyyyy01 apczzzzzzzzz01 on 127.0.0.1
>>> >
>>> > apcxxxxxx01 : 51.00
>>> > apcyyyy01 : 11.00
>>> > apczzzzzzzz01 : 12.00
>>> >
>>> > My yellow and red are 80 and 90 like you suggest (or at least your
>>> > default
>>> > is =)
>>> >
>>> > -> cat ~myhobbituser/server/ext/xymon_nut_ups-load.sh|grep test
>>> > datatest="ups\.load:"
>>> > yellowtest="80"
>>> > redtest="90"
>>> >
>>> > Josh Luthman
>>>
>>>
>>> Ah... I see it...
>>>
>>> Your UPS reports load % with two decimal points (51.00), mine reports %
>>> load
>>> with one (35.6)
>>>
>>> So the logic in the script is correct, but the part where I was stripping
>>> past
>>> the decimal failed to take into account more than one decimal.
>>>
>>> By only stripping the decimal and one numeral past it, the test is saying
>>> "if
>>> 510 > 90 then set the status to red"
>>>
>>>
>>> To fix it, change the line:
>>>
>>> datanopoint=`echo "$data" | "$SED" -e 's/\.[0-9]//'`
>>>
>>> to
>>>
>>> datanopoint=`echo "$data" | "$SED" -e 's/\.[0-9]\{1,2\}//'`
>>>
>>>
>>> P.S. I already made all the changes I mentioned in may last email and will
>>> be
>>> putting up the simplified versions possibly later today, including this
>>> fix.
>>>
>>>
>>> Thanks Josh
>>>
>>> --
>>> Bill Arlofski
>>> Reverse Polarity, LLC
>>>
>>> To unsubscribe from the xymon list, send an e-mail to
>>> xymon-unsubscribe at xymon.com
>>>
>>>
>>
>>
>