[xymon] New UPS monitor added to Xymonton

[Bill Arlofski]

On 07/28/10 12:29, Josh Luthman wrote:
>  >Unless I am mistaken, the test I wrote will be set the status to yellow if
> the
>> UPS load is greater than or equal to $yellowtest (80%) and the status will
> be
>> set to red if the UPS load is eualto or greater than $redtest (80%).
> 
> While this may be your intention that is not what I'm seeing.  I am getting
> a red condition with these loads.
> 
> - UPS load % for apcxxxxxr01 apcyyyy01 apczzzzzzzzz01 on 127.0.0.1
> 
> apcxxxxxx01 : 51.00
> apcyyyy01 : 11.00
> apczzzzzzzz01 : 12.00
> 
> My yellow and red are 80 and 90 like you suggest (or at least your default
> is =)
> 
> -> cat ~myhobbituser/server/ext/xymon_nut_ups-load.sh|grep test
> datatest="ups\.load:"
> yellowtest="80"
> redtest="90"
> 
> Josh Luthman


Ah... I see it...

Your UPS reports load % with two decimal points (51.00), mine reports % load
with one (35.6)

So the logic in the script is correct, but the part where I was stripping past
the decimal failed to take into account more than one decimal.

By only stripping the decimal and one numeral past it, the test is saying "if
510 > 90 then set the status to red"


To fix it, change the line:

datanopoint=`echo "$data" | "$SED" -e 's/\.[0-9]//'`

to

datanopoint=`echo "$data" | "$SED" -e 's/\.[0-9]\{1,2\}//'`


P.S. I already made all the changes I mentioned in may last email and will be
putting up the simplified versions possibly later today, including this fix.


Thanks Josh

--
Bill Arlofski
Reverse Polarity, LLC