Antwort: RE: [hobbit] UPS monitoring using devmon

[thorsten.erdmann at daimler.com]

Hi Craig,
hi David,

sounds very nice.

I tried that snmpwalk. It only works with snmp V1. This is the output:

SNMPv2-SMI::mib-2.33.1.1.1.0 = STRING: "MGE UPS SYSTEMS"
SNMPv2-SMI::mib-2.33.1.1.2.0 = STRING: "Galaxy PW Single//"
SNMPv2-SMI::mib-2.33.1.1.3.0 = ""
SNMPv2-SMI::mib-2.33.1.1.4.0 = STRING: "GB (SN 49EE49044)"
SNMPv2-SMI::mib-2.33.1.1.5.0 = ""
SNMPv2-SMI::mib-2.33.1.1.6.0 = ""

As I see it, this is only the description of the UPS. I will look for the 
MIB of my devices.
Don't know where all the other things which I want to monitor at minimum 
are located in the MIB like:

Overall status or am I runnung on battery
output power
remaining battery time
temperature

> I'll look at uploading it to the SF repository.
Maybe this is a stupid question, but I don't find templates and things on 
the SF page. Only devmon itself.
I look at http://devmon.sourceforge.net/ and at 
http://sourceforge.net/projects/devmon/
There is a devmon-template file there, but as I see it, it contains only 
the templates which are delivered with devmon itself.

It would be nice if you share your templates. You can also contact me via 
EMail at thorsten.erdmann at daimler dot com

Thank you very much

Thorsten



> 
> Craig
> 
> -----Original Message-----
> From: David Baldwin [mailto:david.baldwin at ausport.gov.au] 
> Sent: Thursday, 10 September 2009 11:53 AM
> To: hobbit at hswn.dk
> Subject: Re: [hobbit] UPS monitoring using devmon
> 
> thorsten.erdmann at daimler.com wrote:
> >
> > Hi,
> >
> > sorry if this a little offtopic, but maybe someone has a devmon
> > template for the following UPS:
> >
> > Emerson/Liebert HiPulse MM
> > MGE Galaxy Single
> > MGE Upsilon STS_100 Cross switch
> > MGE Upsilon STS_20 Cross switch
> >
> > Thank you
> > Thorsten
> >
> >
> > If you are not the intended addressee, please inform us immediately
> > that you have received this e-mail in error, and delete it. We thank
> > you for your cooperation.
> >
> I have a template for the standard UPS MIB which I could send through. I
> have a little more work to do on it splitting the power status into 3
> tests for input, output and battery. Should give me motivation to
> complete this today and I will upload to devmon SF site.
> 
> You can check if your UPS supports the standard UPS MIB or wants a
> proprietary one (substituting for myups below, and your community string
> if it is not "public"):
> 
> snmpwalk -v2c -cpublic myups 1.3.6.1.2.1.33.1.1
> 
> Note that some UPS devices only support SNMPv1, so try -v1 instead of
> -v2c above if it doesn't work.
> 
> David.
> 
> -- 
> David Baldwin - IT Unit
> Australian Sports Commission          www.ausport.gov.au
> Tel 02 62147830 Fax 02 62141830       PO Box 176 Belconnen ACT 2616
> david.baldwin at ausport.gov.au          Leverrier Street Bruce ACT 2617
> 
> 
> ------------------------------------------------------------------------
> -------------
> Keep up to date with what's happening in Australian sport visit
> http://www.ausport.gov.au
> 
> This message is intended for the addressee named and may contain
> confidential and privileged information. If you are not the intended
> recipient please note that any form of distribution, copying or use of
> this communication or the information in it is strictly prohibited and
> may be unlawful. If you receive this message in error, please delete it
> and notify the sender.
> ------------------------------------------------------------------------
> -------------
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
> 
> 
> DISCLAIMER:
> 
> 
> The information contained in this email message is confidential and 
> for the attention of the intended recipient only. 
> It is not necessarily the official view or communication of the 
> Rodney District Council. 
> If you are not the intended recipient you must not disclose, copy or
> distribute this message or the information in it. 
> If you have received this message in error, please delete or destroy
> all copies of the email and notify the sender immediately. 
> Rodney District Council  accepts no responsibility for any effects 
> this email message or attachments has on the recipient network or 
> computer system.
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
> 
> 


If you are not the intended addressee, please inform us immediately that you have received this e-mail in error, and delete it. We thank you for your cooperation.  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20090910/55d8355e/attachment.html>