Conn time discrepancy

[wshart at hormel.com]

I've searched the archives and didn't find anything, I'm hoping someone
here has some insight.

Occasionally we'll notice some drastic change in the graphing on Xymon for
the conn times, and when I bring these up with the networking folks they
basically dismiss it because the labels on the side of the scale are
"wrong".  What I'm seeing is that the Y axis is being labeled as "Seconds"
with the "m" after the scale, and it reports around 40-80mS for ping times.
This isn't what we're seeing from the box itself though when we execute the
same hobbitping :

From Xymon page :
<host ip> is alive (44 ms)

From command line on Xymon :

<host ip> is alive (0.13 ms)

What am I missing and why the discrepancy ?

Bill Hart




Notice:
This communication is an electronic communication within the meaning of the Electronic Communications Privacy Act, 18 U.S.C. § 2510.  Its disclosure is strictly limited to the recipient(s) intended by the sender of this message.  This transmission and any attachments may contain proprietary, confidential, attorney-client privileged information and/or attorney work product. If you are not the intended recipient, any disclosure, copying, distribution, reliance on, or use of any of the information contained herein is STRICTLY PROHIBITED.  Please destroy the original transmission and its attachments without reading or saving in any matter and confirm by return email.