[hobbit] Trying to send to dual xymon servers

Mon Nov 2 20:14:56 CET 2009

Looks like you have both BBDISP and BBDISPLAYS configured wrong, see following example.

BBDISP="0.0.0.0"             # IP address of the Hobbit server
BBDISPLAYS="hobbit1.test.com hobbit2.test.com" # IP of multiple Hobbit servers. BBDISP must be "0.0.0.0".

T.J. Yang

________________________________
> From: d.tom.schmitt at L-3com.com
> Date: Mon, 2 Nov 2009 11:13:28 -0700
> To: hobbit at hswn.dk
> Subject: [hobbit] Trying to send to dual xymon servers
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Sorry for this entry being so long. I am trying to
> include as much info as possible.
>
>
>
> Running Xymon 4.3.0-0.beta2 on CentOS 5.3.
>
>
>
>
>
>
>
> I am trying to send to 2 xymon servers (Primary – monitor1,
> Secondary – monitor2) from multiple clients.
>
>
>
> CLIENTS
> BEING TESTED:
>
>
>
> o
> Linux (tomvip)
>
>
>
> o
> BBWin (sltst03)
>
>
>
> o
> Current BB clients that are in service (slcts00)
>
>
>
> It
> worked after we set the 1984 TCP port in the firewall for a short time and then
> quit.
>
>
>
> I am also having the same problem when setting the BBWin to
> point to both server (it works and then it stops to one of them).
>
>
>
> If I add both addresses to the actual BB windows client, they
> both report the exact same icons to both servers and the BB server.
>
>
>
>
>
>
>
> I was able to get both the BB and the BBWin clients to run
> on the same Windows server.
>
>
>
> We setup a different registry name for the BBWin client
> (e.g. slcts00 vs. slcts00.csw.L-3com.com for BB).
>
>
>
>
>
>
>
> I have the iptables firewalls
> on both monitor1 and monitor2 OFF.
>
>
>
> cd
> /etc/init.d
>
>
>
> ./iptables
> stop
>
>
>
>
>
>
>
> I get PURPLE icons on monitor1 and OK icons on
> monitor2: (for Linux, but just dashed for BBWin).
>
>
>
>
>
>
>
> G=green, W=white, P=purple
>
>
>
>
> conn cpu disk files http info
> memory/mem msgs ports procs ssh sslcert trends svcs
>
>
>
> Monitor1: tomvip.csw.l-3com.com
> G P P P G G P P P P G G G
>
>
>
> Monitor1: slcts00.csw.l-3com.com
> G G G G G G G G G (BB
> Client)
>
>
>
> Monitor1: sltst03.csw.L-3com.com G G G G G G G G G
> (BBWin also uptime, who)
>
>
>
>
>
>
>
> Monitor2: tomvip.csw.l-3com.com G G G W G G G G W W G G G
>
>
>
> Monitor1: slcts00.csw.l-3com.com
> G G G G G G G G G (BB
> Client)
>
>
>
> Monitor1: sltst03.csw.L-3com.com G -- -- G -- -- -- G --
> (BBWin)
>
>
>
>
>
>
>
>
>
>
>
> tomvip.csw.l-3com.com:
>
>
>
> Beginning of file from /root/XYMON/client/etc/hobbitclient.cfg:
>
>
>
> #------------------------------------------------------------------------------
>
>
>
> # You may not have to set
> HOBBITCLIENTHOME= or BBOSTYPE= but I set them here
>
>
>
> #------------------------------------------------------------------------------
>
>
>
>
> #
> Directory for the Hobbit client files
>
>
>
> HOBBITCLIENTHOME=/root/XYMON/client
>
>
>
> BBOSTYPE=linux
> # List can include:
>
>
>
>
> #
> aix, dynix, greebsd, hp-ux, irix, linux
>
>
>
>
> #
> redhat, debian, openbsd, netbds, osf
>
>
>
>
> #
> sco, unixware, sunos, solaris, etc.
>
>
>
> #
> See: http://xymon.trantor.org/doku.php/monitors:bbswap
>
>
>
> #
> For setup up of an extension script to monitor swap space.
>
>
>
> #------------------------------------------------------------------------------
>
>
>
> # TO REPORT TO MORE THAN ONE XYMON SERVER
> JUST ADD MORE THAN ONE BBDISP= LINE
>
>
>
> # You can use either the IP
> Addresses or the URLs.
>
>
>
> #------------------------------------------------------------------------------
>
>
>
> BBDISP="monitor1.csw.l-3com.com"
> # IP address of the 1st Hobbit server
>
>
>
> BBDISP="monitor2.csw.l-3com.com"
> # IP address of the 2nd Hobbit server-if setup
>
>
>
> BBDISPLAYS="0.0.0.0"
> #
> IP of multiple Hobbit servers.
>
>
>
>
> #
> BBDISP must be "0.0.0.0".
>
>
>
> CONFIGCLASS="$BBOSTYPE"
> # Default configuration class
> for logfiles
>
>
>
>
> #
> PATH setting for the client scripts
>
>
>
> PATH="/bin:/usr/bin:/sbin:/usr/sbin:/etc"
>
>
>
>
>
>
>
> I have tried it without the BBDISPLAYS=””
> set – still the same output.
>
>
>
>
>
>
>
> Messages on tomvip from /root/XYMON/client/logs/hobbitclient.log:
>
>
>
> 2009-10-26 13:21:26 Whoops ! bb
> failed to send message - Connection failed
>
>
>
> 2009-10-26 13:31:31 Could not
> connect to bbd at monitor1.csw.l-3com.com:1984 - No route to host
>
>
>
> 2009-10-26 13:31:31 Whoops ! bb
> failed to send message - Connection failed
>
>
>
> 2009-10-26 13:36:43 Could not
> connect to bbd at monitor1.csw.l-3com.com:1984 - No route to host
>
>
>
> 2009-10-26 13:36:43 Whoops ! bb
> failed to send message - Connection failed
>
>
>
> 2009-10-26 13:41:37 Could not
> connect to bbd at monitor1.csw.l-3com.com:1984 - No route to host
>
>
>
> 2009-10-26 13:41:37 Whoops ! bb
> failed to send message - Connection failed
>
>
>
>
>
>
>
> I can ping the monitor1 server with no problems.
>
>
>
>
>
>
>
>
>
>
>
> BB-HOSTS Entries for: (wrapped lines for ease of reading)
>
>
>
> MONITOR1:
>
>
>
> 127.0.0.1
> monitor1.csw.l-3com.com
> # bbd conn ssh http://monitor1.csw.l-3com.com
> apache=http://monitor1.csw.l-3com.com/server-status?
>
>
>
> auto
> TRENDS:*,apache:apache|apache1|apache2|apache3
>
>
>
>
> 128.170.1.161 monitor2.csw.l-3com.com # bbd conn
> ssh http://monitor2.csw.l-3com.com
> apache=http://monitor2.csw.l-3com.com/server-status?
>
>
>
> auto
> TRENDS:*,apache:apache|apache1|apache2|apache3
>
>
>
>
> 128.170.1.203 tomvip.csw.l-3com.com #
> conn ssh tftp http://tomvip.csw.l-3com.com/ https://tomvip.csw.l-3com.com./
>
>
>
>
>
>
>
> MONITOR2:
>
>
>
> 128.170.1.151
> monitor1.csw.l-3com.com # bbd conn ssh http://monitor1.csw.l-3com.com
> apache=http://monitor1.csw.l-3com.com/server-status?
>
>
>
> auto
> TRENDS:*,apache:apache|apache1|apache2|apache3
>
>
>
> 127.0.0.1 monitor2.csw.l-3com.com
> # bbd conn ssh http://monitor2.csw.l-3com.com
> apache=http://monitor2.csw.l-3com.com/server-status?
>
>
>
> auto
> TRENDS:*,apache:apache|apache1|apache2|apache3
>
>
>
> 128.170.1.203
> tomvip.csw.l-3com.com :q! # conn ssh
> tftp http://tomvip.csw.l-3com.com/ https://tomvip.csw.l-3com.com/
>
>
>
>
>
>
>
> RULES for iptables (iptables –L):
>
>
>
> zCurrently Running: (iptables stopped)
>
>
>
> Chain
> INPUT (policy ACCEPT)
>
>
>
> target
> prot opt
> source
> destination
>
>
>
>
>
>
>
> Chain FORWARD (policy ACCEPT)
>
>
>
> target
> prot opt
> source
> destination
>
>
>
>
>
>
>
> Chain OUTPUT (policy ACCEPT)
>
>
>
> target
> prot opt
> source
> destination
>
>
>
> [root at monitor2 ~]#
>
>
>
>
>
>
>
> When firewall is enabled:
>
>
>
> [root at monitor2 ~]# cat
> IPTABLES-L.txt
>
>
>
> Chain INPUT (policy ACCEPT)
>
>
>
> target
> prot opt
> source
> destination
>
>
>
> RH-Firewall-1-INPUT
> all --
> anywhere
> anywhere
>
>
>
>
>
>
>
> Chain FORWARD (policy ACCEPT)
>
>
>
> target
> prot opt
> source
> destination
>
>
>
> RH-Firewall-1-INPUT
> all --
> anywhere
> anywhere
>
>
>
>
>
>
>
> Chain OUTPUT (policy ACCEPT)
>
>
>
> target
> prot opt
> source
> destination
>
>
>
>
>
>
>
> Chain RH-Firewall-1-INPUT (2
> references)
>
>
>
> target
> prot opt
> source
> destination
>
>
>
> ACCEPT
> all --
> anywhere
> anywhere
>
>
>
> ACCEPT
> icmp --
> anywhere
> anywhere icmp
> any
>
>
>
> ACCEPT
> esp --
> anywhere
> anywhere
>
>
>
> ACCEPT
> ah --
> anywhere
> anywhere
>
>
>
> ACCEPT
> udp --
> anywhere
> 224.0.0.251 udp dpt:mdns
>
>
>
> ACCEPT
> udp --
> anywhere
> anywhere udp
> dpt:ipp
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere tcp
> dpt:ipp
>
>
>
> ACCEPT
> all -- anywhere
> anywhere
> state RELATED,ESTABLISHED
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere
> state NEW tcp dpt:smtp
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere
> state NEW tcp dpt:ssh
>
>
>
> ACCEPT
> udp -- anywhere
> anywhere
> state NEW udp dpt:netbios-ns
>
>
>
> ACCEPT
> udp --
> anywhere
> anywhere
> state NEW udp dpt:netbios-dgm
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere
> state NEW tcp dpt:netbios-ssn
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere
> state NEW tcp dpt:microsoft-ds
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere
> state NEW tcp dpt:https
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere
> state NEW tcp dpt:http
>
>
>
> ACCEPT
> tcp --
> anywhere
> anywhere
> state NEW tcp dpt:bb
>
>
>
> REJECT
> all --
> anywhere
> anywhere
> reject-with icmp-host-prohibited
>
>
>
> [root at monitor2 ~]#
>
>
>
>
>
>
>
> I am getting more confused as
> I go along, something works and then it stops working and I am not sure what I
> did to change the results?
>
>
>
>
>
>
>
>
>
>
>
> Thanks,
>
>
>
>
>
>
>
> Tom Schmitt
>
>
>
> Senior IT Staff -
> R&D
>
>
>
> Phone (801) 594-3030
>
>
>
> Cell
> (801) 231-7230
>
>
>
> D.Tom.Schmitt at L-3Com.com
>
>
>
>
>
>
>
>
> \\\\|||////
>
>
>
>
> \ ~ ~ /
>
>
>
>
> | @ @ |
>
>
>
> --oOo---(_)---oOo--
>
>
>
>
>
>

_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/