[hobbit] Cisco monitoring?

[Husemann, Harald]

Hi William,

all you have to do is including your switches in the bb-hosts, with a 
line like this:

<ip> <host> # DEVMON

Then, run "devmon --readbbhosts", and the devmon process will start 
polling the switch.

HTH,

Harald

William Ottley schrieb:
> Well we have a few 2600's, and an ASA5500 that I'd like to grab info from,
> such as up time, bandwidth usage, etc....
> I saw that there is a template for cisco ASA so I'm hoping its for that
> machine.
> 
> I'm new at this, and just trying to figure out what "switches" I have to put
> into the bb-hosts files...
> 
> (still haven't figured out what area to change: bb-hosts or the client
> config files)...
> 
> 
> 
> On 19/03/09 9:38 AM, "McDonald, Dan" <Dan.McDonald at austinenergy.com> wrote:
> 
>> On Wed, 2009-03-18 at 12:29 -0400, William Ottley wrote:
>>> Is there a Cisco monitoring script that I could use?
>> Although you will hear many calls for devmon, devmon does not currently
>> support snmp v3.  If that is a requirement for you, then I would
>> recommend using mrtg with appropriate templates, and bbmrtg.pl to report
>> the values to xymon.  I use that technique to monitor 135 UPS, 94
>> temperature/humidity probes, 19 firewalls, and close to 300 Cisco
>> routers/switches.
>>
> 
> 
> 

-- 
Harald Husemann
Netzwerk- und Systemadministrator
Operation Management Center (OMC)
MATERNA GmbH
Information & Communications

Westfalendamm 98
44141 Dortmund

Geschäftsführer: Dr. Winfried Materna, Helmut an de Meulen, Ralph Hartwig
Amtsgericht Dortmund HRB 5839

Tel: +49 231 9505 222
Fax: +49 231 9505 100
www.annyway.com <http://www.annyway.com/>
www.materna.com <http://www.materna.com/>