[hobbit] xymon-4.4.0 - RECOVERED variable always 0

[J Sloan]

bump...

I've verified that the RECOVERED variable works as it should in
hobbit-4.2.0 -

Should I regard 4.4.0 as strictly experimental and use 4.3.0 instead?

Joe

J Sloan wrote:
> I've been working on the snmp trap notification script for xymon servers
> we are testing, and it's partially working. I've set up the hobbit
> alerts to send out an email and an snmp trap, for error conditions, and
> for recovery. So far so good - I am getting the emails, and the snmp
> traps are being sent out for both the failure and the recovery.
>
> However, in troubleshooting the snmp traps, I discovered that the
> RECOVERED variable, which is to be set to "1" if it's a recovery, is
> always set to "0", so the trap code is never incremented, thus we see
> the same trap code for the failure and the recovery, rather than the
> recovery trap code being incremented 1 over the corresponding failure
> trap code.
>
> Sanity check, anyone?
>
> Joe
>
>
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>