[hobbit] RE: Hobbit Emails empty
Kevin Doyle
kdoyle at peak5.com
Wed May 14 22:27:50 CEST 2008
Nevermind... got that one too. A change in the hobbitserver.cfg file and
I am all set
Thanks everybody!
________________________________
From: Kevin Doyle [mailto:kdoyle at peak5.com]
Sent: Wednesday, May 14, 2008 2:13 PM
To: hobbit at hswn.dk
Subject: RE: [hobbit] RE: Hobbit Emails empty
Ok, after some trial and error, I figured this out. Hobbit will only get
the full message from the client if you are using FQDN in bb-hosts and
have the check box on the client checked.
Now is there a way to change the http link that is sent out in the
message? My server uses https rather than http.
________________________________
From: Kevin Doyle [mailto:kdoyle at peak5.com]
Sent: Wednesday, May 14, 2008 11:29 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] RE: Hobbit Emails empty
So where would I look to see what message is being logged by the client?
It appears this is not being sent to sendmail?
________________________________
From: Lars Ebeling [mailto:lars.ebeling at leopg9.no-ip.org]
Sent: Wednesday, May 14, 2008 11:12 AM
To: hobbit at hswn.dk
Subject: Re: [hobbit] RE: Hobbit Emails empty
I am also using bbclient 1.08d without any problems
Lars
----- Original Message -----
From: Josh Luthman <mailto:josh at imaginenetworksllc.com>
To: hobbit at hswn.dk
Sent: Wednesday, May 14, 2008 6:45 PM
Subject: Re: [hobbit] RE: Hobbit Emails empty
Thinking about it I am using the Windows BB client too! It is
on one server that I normally just cuss and disable the tests for, but
it is reporting =)
On Wed, May 14, 2008 at 12:41 PM, Hubbard, Greg L
<greg.hubbard at eds.com> wrote:
I have no problems with the Windows BB client -- I think Henrik
did an excellent job with "backwards" compatibility.
GLH
________________________________
From: Galen Johnson [mailto:Galen.Johnson at sas.com]
Sent: Wednesday, May 14, 2008 11:34 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] RE: Hobbit Emails empty
I don't think hobbit plays well with the BB windows
client (I don't recal where I saw this). Have you tried putting BBWin
on one of the servers to see if that gives you any output?
=G=
From: Kevin Doyle [mailto:kdoyle at peak5.com]
Sent: Wednesday, May 14, 2008 11:00 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] RE: Hobbit Emails empty
Some further information. My clients (mostly Windows2003
servers are running the Big Brother client, version 1-08d
________________________________
From: Josh Luthman [mailto:josh at imaginenetworksllc.com]
Sent: Wednesday, May 14, 2008 8:47 AM
To: hobbit at hswn.dk
Subject: Re: [hobbit] RE: Hobbit Emails empty
Kevin,
Try this:
HOST=*
MAIL kdoyle (at) peak5.com <http://peak5.com/>
COLOR=RED REPEAT=20 RECOVERED
Josh
On Wed, May 14, 2008 at 10:35 AM, Kevin Doyle
<kdoyle at peak5.com> wrote:
Yes here is the relevant line in my hobbit-alerts.cfg
#
# The hobbit-alerts.cfg file controls who receives
alerts
# when a status in the BB system goes into a critical
# state (usually: red, yellow or purple).
#
# This file is made up from RULES and RECIPIENTS.
#
# A RULE is a filter made from the PAGE where a host
# is located in BB; the HOST name, the SERVICE name,
# the COLOR of the status, the TIME of day, and the
# DURATION of the event.
#
# A RECIPIENT can be a MAIL address, or a SCRIPT.
#
# Recipients can also have rules associated with them,
# that modify the rules for a single recipient, e.g.
# you can define a rule for alerting, then add an
# extra criteria e.g. so a single recipient does not get
# alerted until after 20 minutes.
#
# A sample rule:
HOST=* Color=red
MAIL kdoyle (at) peak5.com FORMAT=TEXT COLOR=RED
REPEAT=20 RECOVERED
# MAIL cio at foo.com DURATION>60 COLOR=red
# SCRIPT /usr/local/bin/sendsms 1234567890
FORMAT=SMS
Can you share your ~/server/etc/hobbit-alerts.cfg
please?
________________________________
From: Kevin Doyle
Sent: Tuesday, May 13, 2008 1:12 PM
To: 'hobbit at hswn.dk'
Subject: Hobbit Emails empty
I have a test Hobbit server running on CentOS 5.0 I am
running Hobbit 4.1.2p2 and everything appears to be fuinctioning correct
except alerting. When I trigger an alert, I get an email with only a
subject and no body. I expected to get some information about the alert
and the link to the monitored device. I am sure I am missing something
fairly simple but I am new to Linux and Hobbit.
Any Ideas?
Kevin P. Doyle
Sr. Systems Administrator
Peak5
--
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
Those who don't understand UNIX are condemned to
reinvent it, poorly.
--- Henry Spencer
--
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it,
poorly.
--- Henry Spencer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20080514/47e0b727/attachment.html>
More information about the Xymon
mailing list