[hobbit] Configuration question

[Ralph Mitchell]

Do you get anything after the "close connection"??  I get a bunch of

   init_state(host,domain,com.test, -567484, ...)
   find_or_create_column(test)
   init_state: hostname=host.domain.com, testname=test, color=0......

one for each column for each host.  What do yuo get from this command:

   server/bin/bb localhost "hobbitdboard
fields=hostname,testname,color,flags,lastchange,logtime,validtime,acktime,disabletime,sender,cookie,line1,acklist"

That's all on one line.  It's what bbgen does immediately after logging
"load_state()"

Ralph


On Thu, Jul 10, 2008 at 12:30 PM, Daniel Elswit <de21 at cornell.edu> wrote:

>  Ah… got it.  I see this:
>
>
>
> 2008-07-10 12:38:49 load_bbhosts: -- got line '10.35.80.51
> test.cals.cornell.edu # noping dns ntp'
>
> 2008-07-10 12:38:49 init_host(test.cals.cornell.edu)
>
> 2008-07-10 12:38:49 load_state()
>
> 2008-07-10 12:38:49 Transport setup is:
>
> 2008-07-10 12:38:49 bbdportnumber = 1984
>
> 2008-07-10 12:38:49 bbdispproxyhost = NONE
>
> 2008-07-10 12:38:49 bbdispproxyport = 0
>
> 2008-07-10 12:38:49 Recipient listed as '10.253.209.163'
>
> 2008-07-10 12:38:49 Standard BB protocol on port 1984
>
> 2008-07-10 12:38:49 Will connect to address 10.253.209.163 port 1984
>
> 2008-07-10 12:38:49 Connect status is 0
>
> 2008-07-10 12:38:49 Sent 126 bytes
>
> 2008-07-10 12:38:49 Read 3601 bytes
>
> 2008-07-10 12:38:49 Closing connection
>
>
>
> --Dan
>
>
>
>
>
> *From:* Ralph Mitchell [mailto:ralphmitchell at gmail.com]
> *Sent:* Thursday, July 10, 2008 11:49 AM
>
> *To:* hobbit at hswn.dk
> *Subject:* Re: [hobbit] Configuration question
>
>
>
> OK.  What I did to get that log was: stop hobbit, change the bbdisplay
> entry in server/etc/hobbitlaunch.cfg to read:
>
>      CMD bbgen $BBGENOPTS --report --debug
>
> then I renamed the bb-display.log file and restarted hobbit.  The log
> fragment I posted came from the new bb-display.log during/after it read
> through the bb-hosts file.
>
> I guess you wouldn't need to stop/start Hobbit, as it's trying to launch
> bbgen every minute...
>
> Ralph
>
> On Thu, Jul 10, 2008 at 10:30 AM, Daniel Elswit <de21 at cornell.edu> wrote:
>
> My bb-display.log has not updated in 2 days (not since I had an initial
> problem related to a missing library that was resolved.)  I don't see any of
> what you have below.  The hobbitd.log says "Setup complete".  Upon starting
> of the service, hobbitlaunch.log says:
>
>
>
> 2008-07-10 11:20:46 hobbitlaunch starting
>
> 2008-07-10 11:20:46 Loading tasklist configuration from
> /usr/bin/hobbit/server/etc/hobbitlaunch.cfg
>
> 2008-07-10 11:20:46 Loading hostnames
>
> 2008-07-10 11:20:46 Loading saved state
>
> 2008-07-10 11:20:46 Setting up network listener on 0.0.0.0:1984
>
> 2008-07-10 11:20:46 Setting up signal handlers
>
> 2008-07-10 11:20:46 Setting up hobbitd channels
>
> 2008-07-10 11:20:46 Setting up logfiles
>
> 2008-07-10 11:20:52 Task bbdisplay terminated by signal 6
>
> 2008-07-10 11:21:52 Task bbdisplay terminated by signal 6
>
> 2008-07-10 11:22:52 Task bbdisplay terminated by signal 6
>
>
>
> The bbdisplay errors continue to occur every few minutes.
>
> --Dan
>
>
>
>
>
> *From:* Ralph Mitchell [mailto:ralphmitchell at gmail.com]
> *Sent:* Thursday, July 10, 2008 10:55 AM
>
>
> *To:* hobbit at hswn.dk
> *Subject:* Re: [hobbit] Configuration question
>
>
>
> On Thu, Jul 10, 2008 at 8:41 AM, Daniel Elswit <de21 at cornell.edu> wrote:
>
>  Strangely, bben –debug shows that it cooks right through the bb-hosts
> file and then after the last line, aborts with no further information.
> bbgen –version runs properly and shows the correct version.  I'm beginning
> to wonder if the bbgen file itself is corrupted.
>
>
> This is what I get in my bb-display.log after a restart.  The first two
> lines below are the last two from bb-hosts - a blank comment line and an
> include:
>
>      2008-07-10 09:37:51 load_bbhosts: -- got line '#'
>      2008-07-10 09:37:51 Opening file /home/hobbit/server/etc/ghosts.inc
>      2008-07-10 09:37:51 load_state()
>      2008-07-10 09:37:51 Transport setup is:
>      2008-07-10 09:37:51 bbdportnumber = 1984
>      2008-07-10 09:37:51 bbdispproxyhost = NONE
>      2008-07-10 09:37:51 bbdispproxyport = 0
>      2008-07-10 09:37:51 Recipient listed as '10.134.13.133'
>      2008-07-10 09:37:51 Standard BB protocol on port 1984
>      2008-07-10 09:37:51 Will connect to address 10.134.13.133 port 1984
>
> Do you get the "load_state()" ??
>
> Ralph Mitchell
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20080710/5fcf53d4/attachment.html>