[hobbit] Installing Hobit Client in HPUX
epperson at alumni.unc.edu
epperson at alumni.unc.edu
Wed Apr 2 14:46:19 CEST 2008
Note that you unpacked the tarball relative to your current directory at
the time. If that wasn't /, then you're going to have issues. The last
time I installed an hp-ux client, there was a depot installer package
available, also.
On Wed, April 2, 2008 02:49, pkc_mls wrote:
> Jacob, Davis a écrit :
>>
>> Hi,
>>
>> A quick introduction, I am Davis Jacob a member of the System
>> Engineering team.
>>
>> I am getting a problem when trying to install the client in HPUX
>> machine.
>>
>> When I untar the client version, I get this message;
>>
>> tar -xvf hobbit_hpux.tar
>>
>> x ./etc/rc.config.d/hobbit-client, 880 bytes, 2 tape blocks
>>
>> x ./sbin/init.d/hobbit-client, 3497 bytes, 7 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/bb, 82172 bytes, 161 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/bbcmd, 69884 bytes, 137 tape
>> blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/bbhostgrep, 86268 bytes, 169
>> tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/bbhostshow, 69884 bytes, 137
>> tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-aix.sh, 1452
>> bytes, 3 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-darwin.sh, 1164
>> bytes, 3 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-freebsd.sh, 1462
>> bytes, 3 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-hp-ux.sh, 1565
>> bytes, 4 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-linux.sh, 1363
>> bytes, 3 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-netbsd.sh, 1399
>> bytes, 3 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-openbsd.sh, 1396
>> bytes, 3 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-osf1.sh, 1346
>> bytes, 3 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-sunos.sh, 1652
>> bytes, 4 tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitclient.sh, 1387 bytes, 3
>> tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hobbitlaunch, 78076 bytes, 153
>> tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/bin/hpux-meminfo, 20732 bytes, 41
>> tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/etc/clientlaunch.cfg, 349 bytes, 1
>> tape blocks
>>
>> x ./usr/local/libexec/hobbit/client/etc/hobbitclient.cfg, 1783 bytes,
>> 4 tape blocks
>>
> this is the config file you need to set up to define your hobbit server.
>>
>> x ./usr/local/libexec/hobbit/client/runclient.sh, 2962 bytes, 6 tape
>> blocks
>>
> the client has to be launched via runclient.sh.
> or via one of the starting scripts /sbin/init.d/hobbit-client.
>>
>> x ./usr/local/var/run/hobbitclient-runtime.cfg, 0 bytes, 0 tape blocks
>>
>> But I dont see any installable in it. The HPUX version running is
>> B.11.11
>>
>> Can you please help me with this.
>>
>> Thanks in advance,
>>
>> Davis
>>
>
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>
More information about the Xymon
mailing list