[hobbit] Status not available
Jones, Jason (Altrincham)
JasonAS_Jones at mentor.com
Thu May 10 14:43:02 CEST 2007
Is there a firewall on that box? Also does the localhost entry show any
status'?
-----Original Message-----
From: Sello Tlabela [mailto:tlabelsd at telkom.co.za]
Sent: 10 May 2007 13:36
To: hobbit at hswn.dk
Subject: RE: [hobbit] Status not available
Yes service hobbit-client start and started with no errors
On Thu, 2007-05-10 at 13:09 +0100, Jones, Jason (Altrincham) wrote:
> Sorry no experience with using the rpms but how have you started this?
> Is it:
> service hobbit-client start?
>
> Does the hobbit server note it's own status'? sorry it took a while
for
> me to get back to you, busy day today.
>
> Thanks,
> Jason.
>
> -----Original Message-----
> From: Sello Tlabela [mailto:tlabelsd at telkom.co.za]
> Sent: 10 May 2007 11:10
> To: hobbit at hswn.dk
> Subject: RE: [hobbit] Status not available
>
>
> Hi Jason,
>
> The package name is hobbit-client-4.1.2-1.i386.rpm and config file
> is /etc/sysconfig/hobbit-client below is the contents of the file,
> please let me know if I need a different package and also if I need to
> reconfigure the client
>
> # Configure the Hobbit client settings.
>
> # You MUST set the list of Hobbit servers that this
> # client reports to.
> # It is good to use IP-adresses here instead of DNS
> # names - DNS might not work if there's a problem.
> #
> # E.g. (a single Hobbit server)
> # HOBBITSERVERS="192.168.1.1"
> # or (multiple servers)
> # HOBBITSERVERS="10.0.0.1 192.168.1.1"
>
> HOBBITSERVERS="165.143.145.119"
>
> # The defaults usually suffice for the rest of this file,
> # but you can tweak the hostname that the client reports
> # data with, and the OS name used (typically needed only on
> # RHEL or RHAS servers).
>
> CLIENTHOSTNAME="cntrra20-rh-wiki.telkom.co.za"
> CLIENTOS="rhel4"
>
>
>
> On Thu, 2007-05-10 at 08:52 +0100, Jones, Jason (Altrincham) wrote:
> > # You need to define at least the Hobbit server itself here.
> > #127.0.0.1 localhost # BBDISPLAY BBPAGER BBNET bbd
> > http://localhost/
> >
> > page servers Monitored Servers
> > group-compress <font size="+1">Servers</font>
> >
> > 127.0.0.1 localhost # BBDISPLAY BBPAGER BBNET bbd
> > http://localhost/ ssh disk ports disk files memory
> > 165.143.60.206 cntrra02-rh-hids5 # NET:intern ssh ntp cpu memory
> procs
> > ports disk files syslog-ng
> > 165.143.145.150 cntrra20-rh-wiki # NET:intern ssh syslog ntp
> > http://165.143.145.150/ cpu memory procs ports disk
> >
> > should be:
> >
> > # You need to define at least the Hobbit server itself here.
> > #127.0.0.1 localhost # BBDISPLAY BBPAGER BBNET bbd
> > http://localhost/
> >
> > page servers Monitored Servers
> > group-compress <font size="+1">Servers</font>
> >
> > 127.0.0.1 localhost # BBDISPLAY BBPAGER BBNET bbd
> > http://localhost/ ssh disk ports disk files memory
> > 165.143.60.206 cntrra02-rh-hids5 # NET:intern ssh ntp syslog-ng
> > 165.143.145.150 cntrra20-rh-wiki # NET:intern ssh syslog ntp
> > http://165.143.145.150/
> >
> > ^^ i.e. you don't specify cpu etc.
> >
> > You have installed the hobbit client on these machines correctly
yes?
> > What install procedure did you follow on the client machines and did
> you
> > start them properly?
> >
> > Thanks,
> > Jason.
> >
> > -----Original Message-----
> > From: Sello Tlabela [mailto:tlabelsd at telkom.co.za]
> > Sent: 10 May 2007 08:44
> > To: hobbit at hswn.dk
> > Subject: [hobbit] Status not available
> >
> >
> > Hi Everyone,
> >
> > I am a newbie to hobbit and have being tasked to set up hobbit for
our
> > growing network and, I installed hobbit and added two clients to
> > bb-hosts file and added some tags to them but cpu,memory proc etc do
> not
> > show on web interface, however when i click the icons on the
> > http,ntp,ssh web interface i get status not available error
> >
> > below is a paste of hobbit-client.cfg and bb-hosts respectively
> > # SETTINGS FOR HIDS5
> >
> > HOST=cntrra02-rh-hids5.telkom.co.za
> > UP 30m
> > LOAD 6.0 12.0
> > DISK * 75 85
> > MEMPHYS 100 101
> > MEMSWAP 50 80
> > MEMACT 90 97
> > PROC crond 1
> > PROC syslog-ng 1
> > PROC sshd 1
> > PROC ntpdate 1
> > PORT LOCAL=%[\.:]514 STATE=LISTEN min=2
TEXT=syslog-ng
> > PORT LOCAL=%[\.:]514 STATE=ESTABLISHED min=0
> > TRACK=syslog-ng TEXT=log
> > FILE /var/log/sudo.log TRACK
> > DIR /var/log TRACK
> >
> > # You need to define at least the Hobbit server itself here.
> > #127.0.0.1 localhost # BBDISPLAY BBPAGER BBNET bbd
> > http://localhost/
> >
> > page servers Monitored Servers
> > group-compress <font size="+1">Servers</font>
> >
> > 127.0.0.1 localhost # BBDISPLAY BBPAGER BBNET bbd
> > http://localhost/ ssh disk ports disk files memory
> > 165.143.60.206 cntrra02-rh-hids5 # NET:intern ssh ntp cpu memory
> procs
> > ports disk files syslog-ng
> > 165.143.145.150 cntrra20-rh-wiki # NET:intern ssh syslog ntp
> > http://165.143.145.150/ cpu memory procs ports disk
> >
> >
> > Thanks in advace
--
Sello Tlabela <tlabelsd at telkom.co.za>
Telkom SA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail and its contents are subject to the Telkom SA Limited
e-mail legal notice available at
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
More information about the Xymon
mailing list