[hobbit] [devmon] Problem with thresholds - Use of uninitialized value in numeric gt

[Asif Iqbal]

On 7/20/07, Martijn Moret <martijn at mmoret.com> wrote:
>
> > On 7/20/07, Martijn Moret <martijn at mmoret.com> wrote:
> >>
> >> Hi,
> >>
> >> I'm trying to write a template for the Brocade silkworm 3900/4100.
> >>
> >> All is going well, except for the thresholds.
> >>
> >> Here is my config:
> >> Example for the fans:
> >> oids
> >> FanDescr        : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4.2  : branch
> >> FanState        : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5.2  : branch
> >>
> >> message
> >> TABLE:
> >> Fan location|Fan state
> >> {FanDescr}|{FanState.color}{FanState}
> >>
> >> threshold
> >> FanState        : red   : 3200 : High rpm
> >>
> >> When running devmon in the forground, the following message appears
> when
> >> activating this threshold:
> >> Use of uninitialized value in numeric gt (>) at
> >> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
> >> <$__ANONIO__> line 21894.
> >> Use of uninitialized value in numeric gt (>) at
> >> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
> >> <$__ANONIO__> line 21894.
> >> Use of uninitialized value in numeric gt (>) at
> >> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
> >> <$__ANONIO__> line 21894.
> >> Use of uninitialized value in numeric gt (>) at
> >> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
> >> <$__ANONIO__> line 21894.
> >> Use of uninitialized value in numeric gt (>) at
> >> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
> >> <$__ANONIO__> line 21894.
> >> Use of uninitialized value in numeric gt (>) at
> >> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
> >> <$__ANONIO__> line 21894.
> >>
> >> There are six fans, this line appears one time for each fan.
> >
> >
> >
> > Don't worry about those errors. I get those too but it is working just
> > fine.
> > What problem are you
> > having besides those messages?
> >
> Some more info:
> It works fine with 'leave' oids and fails with 'branch' oids.



I only used leaf.  And before you use a oid  you want to make sure snmpget
gives you valid output with that `oid'

Here is an example of a custom template I use for Arbor DOS routers

(hobbit)@hobbit:~/server/etc$ cat
/usr/local/devmon/templates/arbor-lead/cpu/thresholds

CPULoadAvg5Min  : red           : >800  : CPU utilization is high:
{CPULoadAvg5Min}

sysUpTimeSecs   : red           : <600  : Device rebooted recently. System
uptime: {UpTimeTxt}
sysUpTimeSecs   : yellow        : <5000 : Device rebooted recently. System
uptime: {UpTimeTxt}
sysUpTimeSecs   : green         :       : System uptime: {UpTimeTxt}

(hobbit)@hobbit:~/server/etc$ cat
/usr/local/devmon/templates/arbor-lead/cpu/oids

sysDescr        : .1.3.6.1.2.1.1.1.0                    : leaf
sysUpTime       : .1.3.6.1.2.1.1.3.0                    : leaf
CPULoadAvg1Min  : .1.3.6.1.4.1.9694.1.4.2.1.1.0         : leaf
CPULoadAvg5Min  : .1.3.6.1.4.1.9694.1.4.2.1.2.0         : leaf
CPULoadAvg15Min : .1.3.6.1.4.1.9694.1.4.2.1.3.0         : leaf



Regards
> Martijn
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>


-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20070720/67438ba2/attachment.html>