[hobbit] [devmon] Problem with thresholds - Use of uninitialized value in numeric gt

[Martijn Moret]

> On 7/20/07, Martijn Moret <martijn at mmoret.com> wrote:
>>
>> Hi,
>>
>> I'm trying to write a template for the Brocade silkworm 3900/4100.
>>
>> All is going well, except for the thresholds.
>>
>> Here is my config:
>> Example for the fans:
>> oids
>> FanDescr        : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4.2  : branch
>> FanState        : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5.2  : branch
>>
>> message
>> TABLE:
>> Fan location|Fan state
>> {FanDescr}|{FanState.color}{FanState}
>>
>> threshold
>> FanState        : red   : 3200 : High rpm
>>
>> When running devmon in the forground, the following message appears when
>> activating this threshold:
>> Use of uninitialized value in numeric gt (>) at
>> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
>> <$__ANONIO__> line 21894.
>> Use of uninitialized value in numeric gt (>) at
>> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
>> <$__ANONIO__> line 21894.
>> Use of uninitialized value in numeric gt (>) at
>> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
>> <$__ANONIO__> line 21894.
>> Use of uninitialized value in numeric gt (>) at
>> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
>> <$__ANONIO__> line 21894.
>> Use of uninitialized value in numeric gt (>) at
>> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
>> <$__ANONIO__> line 21894.
>> Use of uninitialized value in numeric gt (>) at
>> /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314,
>> <$__ANONIO__> line 21894.
>>
>> There are six fans, this line appears one time for each fan.
>
>
>
> Don't worry about those errors. I get those too but it is working just
> fine.
> What problem are you
> having besides those messages?
>
Thanks for your quick reply.
The thresholds are not working.
I setup a test with the fans (they are running between 3000 and 3250 rpm).
If I set the threshold yellow to >3200 no fan is turning yellow.
I think the thresholds are not being used as no comparison is being made.

Regards
Martijn