[hobbit] Antwort: [hobbit] Procs test clear?

[Dominique Frise]

stefan.freisler at aspect-online.de wrote:
> 
> Hi,
> i get some error in my hobbitd.log
> 
> 2007-01-25 15:49:47 Oversize status msg from 10.28.1.37 for 
> xxxxxxxxxxxx.de:ports truncated (n=360392, limit=262144)
> 
> i have now put in my hobbit-server.cfg the following lines:
> 
> MAXMSG_STATUS="1024"
> MAXMSG_CLIENT="1024"
> MAXMSG_DATA="1024"
> MAXMSG_NOTES="1024"
> 
> Is this correct? My Client send Date correctly but i get allways data 
> like and i have an clear status:
> *Thu Jan 25 16:06:31 CET 2007 - Processes NOT ok*
> clear No process checks defined
> 
>  PID  PPID USER      STARTED S PRI %CPU     TIME %MEM   RSZ    VSZ CMD
>    1     0 root     11:54:08 S  23  0.0 00:00:02  0.0   568   1740 init 
> [3]  
> .......
> 
> stefan.freisler at aspect-online.de schrieb am 25.01.2007 15:06:36:
> 
>  >
>  > Hi,
>  > i installed an server and now my procs test is clear, while i have
>  > configured my server correct i think:
>  >
>  > All other Tests work fine. What can i do?
>  >
>  > HOST=xxxxxxxxxxxx.de
>  >         PROC crond 1 -1 red
>  >         LOG /var/log/messages error,fail,panic,NOTICE COLOR=red %
>  > uthentication.failure
>  >         LOG /var/log/messages warn,WARN COLOR=yellow 
> %uthentication.failure
>  >         LOG /var/log/boot.log error,fail,panic,NOTICE COLOR=red
>  >         LOG /var/log/boot.log warn,WARN COLOR=yellow
>  >         LOG /var/log/maillog error,fail,panic,NOTICE COLOR=red 
> %format.error
>  >         LOG /var/log/maillog warn,WARN COLOR=yellow %format.error
>  >         LOG /var/log/cron error,fail,panic,NOTICE COLOR=red
>  >         LOG /var/log/cron warn,WARN COLOR=yellow
>  >
>  >
>  >
>  > DEFAULT
>  >         # These are the built-in defaults.
>  >         UP      1h
>  >         LOAD    5.0 10.0
>  >         DISK    * 90 95
>  >         MEMPHYS 100 101
>  >         MEMSWAP 50 80
>  >         MEMACT  90 97
>  >
>  > on all other systems it works with this or nearly the same config.
>  >
>  > thx
>  > Stefan


You have to put bytes values in MAXMSG_* settings.
Default for MAXMSG_STATUS is 262144 or 256 KB.

Example for 512 KB
MAXMSG_STATUS="524288"


Dominique
UNIL - University of Lausanne