[hobbit] Help with disk monitoring

[PNIXON at ci.somerville.ma.us]

In the meantime, before you get around to all your clients,
 you can edit the bbsys.local file and change

DF="/bin/df -k"
Line to:
DF="/bin/df -kP"

Which will take out the extra line return.

*PS - Dangit Henrik! I knew this answer and was looking for it to see where
to change it! Hehehe!
 

-----Original Message-----
From: Bailey, Edward [mailto:ebailey at transunion.com] 
Sent: Monday, December 11, 2006 4:42 PM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Help with disk monitoring

Thanks for your quick response:) I did see that we have the big brother
client installed so I need to plan on upgrading the clients first.

Thanks again

Ed 

> -----Original Message-----
> From: Henrik Stoerner [mailto:henrik at hswn.dk]
> Sent: Monday, December 11, 2006 4:28 PM
> To: hobbit at hswn.dk
> Subject: Re: [hobbit] Help with disk monitoring
> 
> On Mon, Dec 11, 2006 at 04:21:16PM -0500, Bailey, Edward wrote:
> > Also the file systems from these problem servers show up
> differently
> > as well. The standard file system mounts are displayed without an 
> > issues but the LVM maps display the mount point but nothing else
> > 
> > /dev/mapper/sysvg-opt
> > /dev/mapper/sysvg-var
> > /dev/cciss/c0d0p1      2016016    216060   1697544  12% /
> > /dev/cciss/c0d0p2      3020172    950024   1916728  34% /usr
> 
> This is a classical problem with the Big Brother client - you are 
> apparently using the BB client instead of the Hobbit client. What's 
> happening is that the "df" command used on the monitored servers 
> breaks long lines in the output, so your "df" output looks like
> 
> Filesystem           1K-blocks      Used Available Use% Mounted on
> /dev/sda1               579598    192382    356293  36% /
> /dev/mapper/vg1-lv_usr
>                        2568144    648964   1788724  27% /usr
> /dev/mapper/vg1-lv_var
>                        1048540    733448    315092  70% /var
> 
> and since the BB client does a 'grep "^/dev"' to weed out entries like 
> tmpfs, you only get the /dev/mapper line, not the next line with the 
> actual data in it.
> 
> The solution is to change the DFCMD setting on your servers to "df 
> -P", making it use the POSIX format output.
> 
> 
> Regards,
> Henrik
> 
> 
> To unsubscribe from the hobbit list, send an e-mail to 
> hobbit-unsubscribe at hswn.dk
> 
> 
> 
> 
> 
------------------------
CONFIDENTIALITY NOTICE
This e-mail and any attachments contain information which may be
confidential or privileged and exempt from disclosure under applicable law.
If you are not the intended recipient, be aware that any disclosure,
copying, distribution, or use of the contents of this information is without
authorization and is prohibited.  If you have received this email in error,
please immediately notify us by returning it to the sender and delete this
copy from your computer system.  Thank you.
------------------------

To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk