[hobbit] "ports" RRD graph not showing up

[Jerry Yu]

oh, you are using it under a wild-card (or multi-host) HOST= section thus
you want to limit the test to apply to that HOST alone. makes sense then.
I think the missing () is somewhat important too. If I recall correctly, I
didn't have much sucess until I inserted () myself.

On 8/31/06, Gary B. <gmbfly98 at gmail.com> wrote:
>
> > I don't use HOST= in my working PORT tracking. I agree with Greg on
> doing it
> > via the RegExp itself.
>
> The problem with that is, it will perform the PORT test on all of the
> machines under the HOST= section the test is under.  I don't want
> this, as only one of the machines actually has the ports running.  I
> haven't had a problem using HOST= in this manner before, and it's
> described in the "rules to select hosts" section in the manpage for
> hobbit-clients.cfg
>
> > minor thing: not so sure TRACK= can take all numeric or not.
> > I believe your RegExp needs (). Mine goes like below. I have PORT column
> > show and alerts generated, plus RRD graph for counting of TIME_WAIT
> > connections to
> >  PORT LOCAL=%([.:]3306)$ STATE=TIME_WAIT MIN=0 MAX=10000 COL=yellow
> > TRACK=db_TimeWait TEXT=db_TimeWait
>
> I was wondering that myself.  I'll try changing to TRACK= to be
> character-based and see if that helps.
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20060831/08b4e8ba/attachment.html>