[hobbit] Viewing Custom Graphs
Gada, Subhash
subhash.gada at logicacmg.com
Mon Apr 3 08:11:15 CEST 2006
DS names are c0d0p1rps, c0d0p2rps..............
For rps and wps so,
Is the below rrdtool dum from one file or multiple files.
If the dump is from only one file how many incremental number you have
in the file i.e. c0d0p1rps, c0d0p2rps for both rps and wps.
-----Original Message-----
From: EyalRi at Clal-Ins.co.il [mailto:EyalRi at Clal-Ins.co.il]
Sent: Monday, April 03, 2006 10:54 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Viewing Custom Graphs
Hi,
This is taken for my file using "rrdtool dump" (the output is longer) -
any idea what is wrong ?
<ds>
<name> c0d0p1rps </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> UNKN </last_ds>
<value> 0.0000000000e+00 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
<ds>
<name> c0d0p1wps </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> UNKN </last_ds>
<value> 0.0000000000e+00 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
<ds>
<name> c0d0p2rps </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> UNKN </last_ds>
<value> 0.0000000000e+00 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
<ds>
<name> c0d0p2wps </name>
<type> DERIVE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> 4 </last_ds>
<value> 0.0000000000e+00 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
<ds>
<name> c0d0p3rps </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> UNKN </last_ds>
<value> 2.1700000000e+02 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
<ds>
<name> c0d0p3wps </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> UNKN </last_ds>
<value> 8.6800000000e+02 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
<ds>
<name> c0d0p4rps </name>
<type> DERIVE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> 0 </last_ds>
<value> 0.0000000000e+00 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
Thanks,
-----Original Message-----
From: Gada, Subhash [mailto:subhash.gada at logicacmg.com]
Sent: Monday, April 03, 2006 8:01 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Viewing Custom Graphs
Hi,
Check your rrd file (rrdtool dump foo.rrd | less) whether the DS name is
same as in your hobbitgraph.cfg for [iostat].
-----Original Message-----
From: EyalRi at Clal-Ins.co.il [mailto:EyalRi at Clal-Ins.co.il]
Sent: Sunday, April 02, 2006 5:22 PM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Viewing Custom Graphs
Hi,
I have added the following :
[iostat]
TITLE IoStat
YAXIS Bytes/Second
DEF:c0d0p1rps=iostat.rrd:c0d0p1rps:AVERAGE
DEF:c0d0p1wps=iostat.rrd:c0d0p1wps:AVERAGE
LINE1:c0d0p1rps#00FF00:read
LINE2:c0d0p1wps#FF0000:write
COMMENT:\n
GPRINT:c0d0p1rps:LAST:In \: %5.1lf%s (cur)
GPRINT:c0d0p1rps:MAX: \: %5.1lf%s (max)
GPRINT:c0d0p1rps:MIN: \: %5.1lf%s (min)
GPRINT:c0d0p1rps:AVERAGE: \: %5.1lf%s (avg)\n
GPRINT:c0d0p1wps:LAST:Out \: %5.1lf%s (cur)
GPRINT:c0d0p1wps:MAX: \: %5.1lf%s (max)
GPRINT:c0d0p1wps:MIN: \: %5.1lf%s (min)
GPRINT:c0d0p1wps:AVERAGE: \: %5.1lf%s (avg)\n
for the following data received:
c0d0p1rps:0
c0d0p1wps:0
c0d0p2rps:0
c0d0p2wps:4
c0d0p3rps:1
c0d0p3wps:4
c0d0p4rps:0
c0d0p4wps:0
c0d0p5rps:0
c0d0p5wps:0
c0d0p6rps:0
c0d0p6wps:0
c0d0p7rps:0
c0d0p7wps:14
c0d0p8rps:0
c0d0p8wps:41
c0d0p9rps:0
c0d0p9wps:0
c0d0p10rps:0
c0d0p10wps:4
c0d0p11rps:1
c0d0p11wps:0
But it doesn't produce the graphs.
I am getting quite deseparate about the custom graphs.
-----Original Message-----
From: Charles Jones [mailto:jonescr at cisco.com]
Sent: Sunday, April 02, 2006 2:15 PM
To: hobbit at hswn.dk
Subject: Re: [hobbit] Viewing Custom Graphs
lars ebeling wrote:
> You have to change the shared memory parameters. I don't know howe to
> do that in Linux,
/etc/sysctl.conf
kernel.shmmax = value
kernel.shmmni = value
kernel.shmall = value
kernel.sem = value
Where value depends on how much memory you have, and what other
processes need shared memory. Google for sysctl.conf and your flavor of
linux and you should find what you need.
-Charles
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
------------------------------------------------------------------------
-----------------
This message was sent by Clal Insurance Ltd Mail Systems
Visit us at http://www.clalbit.co.il
------------------------------------------------------------------------
-----------------
The information in this e-mail and any attachments is confidential and
may be
legally privileged. It is intended solely for the addressee or
addressees. If
you are not an intended recipient, please delete the message and any
attachments
and notify the sender of misdelivery: any use or disclosure of the
contents of
either is unauthorized and may be unlawful.
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be
copied, disclosed to, retained or used by, any other party. If you are
not an intended recipient then please promptly delete this e-mail and
any attachment and all copies and inform the sender. Thank you.
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
More information about the Xymon
mailing list