<font size=2 face="sans-serif">Some time ago I had found the lm_sensors
project. </font>
<br><font size=2 face="sans-serif">There were some instructions for many
hardware.</font>
<br><font size=2 face="sans-serif">Sorry to say, but right now the web-site
</font><a href="http://lm-sensors.org/"><font size=2 face="sans-serif">http://lm-sensors.org/</font></a><font size=2 face="sans-serif">
have no more content about this.</font>
<br>
<br><font size=2 face="sans-serif">However the lm-sensors was included
in many Linux distributions (at least on CentOS, RHEL 6.x and similar),
</font>
<br><font size=2 face="sans-serif">so it was possible to:</font>
<br>
<br><tt><font size=2># install</font></tt>
<br><tt><font size=2>yum install lm_sensors</font></tt>
<br>
<br><tt><font size=2># run to detect devices</font></tt>
<br><tt><font size=2>sensors-detect</font></tt>
<br>
<br><tt><font size=2># and if OK (it has drivers for your hardware) then
can get the output:</font></tt>
<br><tt><font size=2>sensors</font></tt>
<br>
<br><tt><font size=2>acpitz-virtual-0</font></tt>
<br><tt><font size=2>Adapter: Virtual device</font></tt>
<br><tt><font size=2>temp1:        +8.3 C  (crit
= +31.3 C)</font></tt>
<br>
<br><tt><font size=2>coretemp-isa-0000</font></tt>
<br><tt><font size=2>Adapter: ISA adapter</font></tt>
<br><tt><font size=2>Physical id 0: +57.0 C  (high = +78.0 C, crit
= +88.0 C)</font></tt>
<br><tt><font size=2>Core 0:        +54.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br><tt><font size=2>Core 1:        +52.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br><tt><font size=2>Core 2:        +51.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br><tt><font size=2>Core 3:        +54.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br>
<br><tt><font size=2>power_meter-acpi-0</font></tt>
<br><tt><font size=2>Adapter: ACPI interface</font></tt>
<br><tt><font size=2>power1:       0.00 nW  (interval
= 300.00 s)</font></tt>
<br>
<br><tt><font size=2>coretemp-isa-0004</font></tt>
<br><tt><font size=2>Adapter: ISA adapter</font></tt>
<br><tt><font size=2>Physical id 1: +50.0 C  (high = +78.0 C, crit
= +88.0 C)</font></tt>
<br><tt><font size=2>Core 0:        +50.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br><tt><font size=2>Core 1:        +49.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br><tt><font size=2>Core 2:        +45.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br><tt><font size=2>Core 3:        +49.0 C  (high
= +78.0 C, crit = +88.0 C)</font></tt>
<br>
<br><font size=2 face="sans-serif">Detailed information is available at:
</font><a href=https://www.kernel.org/doc/Documentation/thermal/><font size=2 face="sans-serif">https://www.kernel.org/doc/Documentation/thermal/</font></a>
<br>
<br><font size=2 face="sans-serif">Please, drop me a mail if You will find
anything useful. I am interested too.</font>
<br>
<br>
<br><font size=2 face="Verdana">Best regards,</font>
<br>
<br><font size=2 face="Verdana">Andrey Chervonets</font>
<br><font size=2 face="Verdana">----------------------</font>
<br><font size=2 face="Verdana">CoMinder Support</font>
<br><a href=http://www.cominder.eu/><font size=2 face="Verdana">http://www.cominder.eu/</font></a>
<br><font size=2 face="Verdana">mobile: +371 26517848</font>
<br>