<div dir="ltr"><div><div><div><div><div><div><div><div><div><div><div><div><div><div><div><div>Hi,<br><br></div>I would have perhaps asked in the Devmon mailing list but my question is quite pertinent to Xymon too and this mailing list is a little more active with many using Devmon.<br><br></div>I have a check, it's called temp.<br><br></div>I have a Devmon template for an IBM UPS device and I have a template for an IBM PDU device.  Both have a temp check for reading temperature and humidity.<br><br></div>The IBM UPS template has existed for a while and has been displaying temp graphs. I have temp=ncv, temp in GRAPHS and an entry in graphs.cfg and xymonserver.cfg.<br><br></div>What happens when you introduce a temp check to a new device that has a different template?  Do you have to create an extra line in graphs.cfg/Xymonserver.cfg?  Is it the same name?<br><br></div>ie do I have to use <br><br></div>NCV_temp=temperature:GAUGE (temperature being what is parsed from message file of template)<br></div>for template 1 (IBM UPS)<br><br></div>and <br><br></div>NCV_temp=pdutemperature:GAUGE (pdutemperature being what is parsed from message file of template)</div>for template 2 (IBM PDU)<br><br></div>OR<br><br></div>Do I have to use a different check/column name for each use of temperature per device? I might use Devmon for temperature/Humidity readings on a UPS device, or a PDU, or a server, or a network device and the templates I use in Devmon will be completely different.  In which case I would have to use temppdu for example in xymonserver.cfg/Graphs.cfg alongside the existing temp<br><br></div>Hopefully my question is clear, <br><br></div>thanks<br><br></div>Steve<br></div>