I would also check the ghost client report to make sure that the SLES client is sending the correct hostname to the Hobbit server. I have found on some linux clients, it send the hostname and some send the FQDN. I usually just manually modify the client config to send the hostname I want and not rely on the automatic (which I think is uname -n by default ... don't quote me on that though ... not near my Hobbit box right now).<br clear="all">
<br>'Nobody goes there anymore. It's too crowded.' --Yogi Berra<br>
<br><br><div class="gmail_quote">On Mon, Dec 1, 2008 at 11:10 PM, Great D Dilla <span dir="ltr"><<a href="mailto:great.dilla@gmail.com">great.dilla@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
A couple of things to check on the client:<br>
[1] Make sure that the hostname of the hobbit server is resolvable from the<br>
client side. Or better yet, use the IP address of the hobbit server on the<br>
config file ==> BBDISPLAY=[IP_or_HOSTNAME_of_hobbit_server].<br>
[2] Check to see if indeed the master is getting files. Usually there are<br>
files in the data directory generated for your client.<br>
<br>
Side note:<br>
To configure the hobbit client, simply use "./configure.client" and supply<br>
the IP of the hobbit server. It should work out of the box.<br>
<br>
Hope this helps.<br>
<div><div></div><div class="Wj3C7c"><br>
<br>
-----Original Message-----<br>
From: Brian Catlin [mailto:<a href="mailto:bcatlin@gmail.com">bcatlin@gmail.com</a>]<br>
Sent: Tuesday, December 02, 2008 10:34 AM<br>
To: <a href="mailto:hobbit@hswn.dk">hobbit@hswn.dk</a><br>
Subject: [hobbit] Novell SuSE SLES 10 client issue.<br>
<br>
Okay,<br>
<br>
I have a few Novell SuSE SLES 10 servers.   I compiled the 4.2 client on one<br>
of them and tried to get it to talk to the Master running on Solaris 9.<br>
<br>
The page shows the Master tests, ping, ssh (and they work! - got paged<br>
tonight when the interface on one went AWOL)<br>
<br>
On the client side.  In client/tmp = the files are created and ready to send<br>
 The client has a couple probes, and they have good output too.<br>
<br>
I can telnet to the master from the clients on port 1984 successfully.  The<br>
client refuses to publish out to the Master.<br>
<br>
<br>
My bb-hosts has the proper entries for IP and names (tested that<br>
empirically ) and I have a number of graphs spec'd after trends:*<br>
<br>
My sun connections all work fine (Solaris 9 mainly, no 10)<br>
<br>
I am wondering if something needs to be changed in the compile to make the<br>
client work on SLES 10.<br>
<br>
I am NOT a programmer, so need some help here...<br>
<br>
<a href="mailto:lurch@inorbit.com">lurch@inorbit.com</a><br>
<br>
To unsubscribe from the hobbit list, send an e-mail to<br>
<a href="mailto:hobbit-unsubscribe@hswn.dk">hobbit-unsubscribe@hswn.dk</a><br>
<br>
<br>
<br>
To unsubscribe from the hobbit list, send an e-mail to<br>
<a href="mailto:hobbit-unsubscribe@hswn.dk">hobbit-unsubscribe@hswn.dk</a><br>
<br>
<br>
</div></div></blockquote></div><br>